MakeItFrom.com
Menu (ESC)

5052 Aluminum vs. EN 1.4749 Stainless Steel

5052 aluminum belongs to the aluminum alloys classification, while EN 1.4749 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5052 aluminum and the bottom bar is EN 1.4749 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 46 to 83
180
Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 1.1 to 22
16
Fatigue Strength, MPa 66 to 140
190
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
80
Shear Strength, MPa 120 to 180
370
Tensile Strength: Ultimate (UTS), MPa 190 to 320
600
Tensile Strength: Yield (Proof), MPa 75 to 280
320

Thermal Properties

Latent Heat of Fusion, J/g 400
300
Maximum Temperature: Mechanical, °C 190
1100
Melting Completion (Liquidus), °C 650
1420
Melting Onset (Solidus), °C 610
1380
Specific Heat Capacity, J/kg-K 900
490
Thermal Conductivity, W/m-K 140
17
Thermal Expansion, µm/m-K 24
9.6

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
2.5
Electrical Conductivity: Equal Weight (Specific), % IACS 120
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
13
Density, g/cm3 2.7
7.6
Embodied Carbon, kg CO2/kg material 8.6
2.5
Embodied Energy, MJ/kg 150
36
Embodied Water, L/kg 1190
160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 1.7 to 69
80
Resilience: Unit (Modulus of Resilience), kJ/m3 41 to 590
250
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 50
26
Strength to Weight: Axial, points 19 to 33
22
Strength to Weight: Bending, points 27 to 38
21
Thermal Diffusivity, mm2/s 57
4.6
Thermal Shock Resistance, points 8.3 to 14
22

Alloy Composition

Aluminum (Al), % 95.8 to 97.7
0
Carbon (C), % 0
0.15 to 0.2
Chromium (Cr), % 0.15 to 0.35
26 to 29
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.4
68.5 to 73.7
Magnesium (Mg), % 2.2 to 2.8
0
Manganese (Mn), % 0 to 0.1
0 to 1.0
Nitrogen (N), % 0
0.15 to 0.25
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.25
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0