MakeItFrom.com
Menu (ESC)

520.0 Aluminum vs. EN 1.4922 Stainless Steel

520.0 aluminum belongs to the aluminum alloys classification, while EN 1.4922 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 520.0 aluminum and the bottom bar is EN 1.4922 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 66
190
Elongation at Break, % 14
16
Fatigue Strength, MPa 55
330
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 25
76
Shear Strength, MPa 230
470
Tensile Strength: Ultimate (UTS), MPa 330
770
Tensile Strength: Yield (Proof), MPa 170
550

Thermal Properties

Latent Heat of Fusion, J/g 390
270
Maximum Temperature: Mechanical, °C 170
720
Melting Completion (Liquidus), °C 600
1460
Melting Onset (Solidus), °C 480
1410
Specific Heat Capacity, J/kg-K 910
470
Thermal Conductivity, W/m-K 87
24
Thermal Expansion, µm/m-K 25
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 21
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 72
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
7.5
Density, g/cm3 2.6
7.8
Embodied Carbon, kg CO2/kg material 9.8
2.8
Embodied Energy, MJ/kg 160
40
Embodied Water, L/kg 1170
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 39
110
Resilience: Unit (Modulus of Resilience), kJ/m3 230
770
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 52
25
Strength to Weight: Axial, points 35
27
Strength to Weight: Bending, points 41
24
Thermal Diffusivity, mm2/s 37
6.5
Thermal Shock Resistance, points 14
27

Alloy Composition

Aluminum (Al), % 87.9 to 90.5
0
Carbon (C), % 0
0.17 to 0.23
Chromium (Cr), % 0
10 to 12.5
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 0 to 0.3
83.5 to 88.2
Magnesium (Mg), % 9.5 to 10.6
0
Manganese (Mn), % 0 to 0.15
0.3 to 1.0
Molybdenum (Mo), % 0
0.8 to 1.2
Nickel (Ni), % 0
0.3 to 0.8
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0 to 0.25
0 to 0.4
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.25
0
Vanadium (V), % 0
0.2 to 0.35
Zinc (Zn), % 0 to 0.15
0
Residuals, % 0 to 0.15
0