MakeItFrom.com
Menu (ESC)

5454 Aluminum vs. CC763S Brass

5454 aluminum belongs to the aluminum alloys classification, while CC763S brass belongs to the copper alloys. There are 27 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5454 aluminum and the bottom bar is CC763S brass.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 61 to 93
130
Elastic (Young's, Tensile) Modulus, GPa 69
110
Elongation at Break, % 2.3 to 18
7.3
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
41
Tensile Strength: Ultimate (UTS), MPa 230 to 350
490
Tensile Strength: Yield (Proof), MPa 97 to 290
270

Thermal Properties

Latent Heat of Fusion, J/g 400
190
Maximum Temperature: Mechanical, °C 190
140
Melting Completion (Liquidus), °C 650
870
Melting Onset (Solidus), °C 600
830
Specific Heat Capacity, J/kg-K 900
400
Thermal Expansion, µm/m-K 24
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
29
Electrical Conductivity: Equal Weight (Specific), % IACS 110
32

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
24
Density, g/cm3 2.7
8.0
Embodied Carbon, kg CO2/kg material 8.6
2.9
Embodied Energy, MJ/kg 150
49
Embodied Water, L/kg 1180
330

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.3 to 34
30
Resilience: Unit (Modulus of Resilience), kJ/m3 68 to 590
340
Stiffness to Weight: Axial, points 14
7.5
Stiffness to Weight: Bending, points 50
20
Strength to Weight: Axial, points 23 to 36
17
Strength to Weight: Bending, points 30 to 41
17
Thermal Shock Resistance, points 10 to 16
16

Alloy Composition

Aluminum (Al), % 94.5 to 97.1
1.0 to 2.5
Antimony (Sb), % 0
0 to 0.080
Chromium (Cr), % 0.050 to 0.2
0
Copper (Cu), % 0 to 0.1
56.5 to 67
Iron (Fe), % 0 to 0.4
0.5 to 2.0
Lead (Pb), % 0
0 to 1.5
Magnesium (Mg), % 2.4 to 3.0
0
Manganese (Mn), % 0.5 to 1.0
1.0 to 3.5
Nickel (Ni), % 0
0 to 2.5
Silicon (Si), % 0 to 0.25
0 to 1.0
Tin (Sn), % 0
0 to 1.0
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.25
18.9 to 41
Residuals, % 0 to 0.15
0