MakeItFrom.com
Menu (ESC)

5454 Aluminum vs. CC766S Brass

5454 aluminum belongs to the aluminum alloys classification, while CC766S brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5454 aluminum and the bottom bar is CC766S brass.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 61 to 93
120
Elastic (Young's, Tensile) Modulus, GPa 69
110
Elongation at Break, % 2.3 to 18
28
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
40
Tensile Strength: Ultimate (UTS), MPa 230 to 350
500
Tensile Strength: Yield (Proof), MPa 97 to 290
190

Thermal Properties

Latent Heat of Fusion, J/g 400
180
Maximum Temperature: Mechanical, °C 190
130
Melting Completion (Liquidus), °C 650
840
Melting Onset (Solidus), °C 600
800
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 130
89
Thermal Expansion, µm/m-K 24
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
32
Electrical Conductivity: Equal Weight (Specific), % IACS 110
36

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
24
Density, g/cm3 2.7
8.0
Embodied Carbon, kg CO2/kg material 8.6
2.8
Embodied Energy, MJ/kg 150
48
Embodied Water, L/kg 1180
330

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.3 to 34
110
Resilience: Unit (Modulus of Resilience), kJ/m3 68 to 590
180
Stiffness to Weight: Axial, points 14
7.3
Stiffness to Weight: Bending, points 50
20
Strength to Weight: Axial, points 23 to 36
17
Strength to Weight: Bending, points 30 to 41
18
Thermal Diffusivity, mm2/s 55
28
Thermal Shock Resistance, points 10 to 16
17

Alloy Composition

Aluminum (Al), % 94.5 to 97.1
0.3 to 1.8
Antimony (Sb), % 0
0 to 0.1
Chromium (Cr), % 0.050 to 0.2
0
Copper (Cu), % 0 to 0.1
58 to 64
Iron (Fe), % 0 to 0.4
0 to 0.5
Lead (Pb), % 0
0 to 0.5
Magnesium (Mg), % 2.4 to 3.0
0
Manganese (Mn), % 0.5 to 1.0
0 to 0.5
Nickel (Ni), % 0
0 to 2.0
Silicon (Si), % 0 to 0.25
0 to 0.6
Tin (Sn), % 0
0 to 0.5
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.25
29.5 to 41.7
Residuals, % 0 to 0.15
0