MakeItFrom.com
Menu (ESC)

5454 Aluminum vs. C85400 Brass

5454 aluminum belongs to the aluminum alloys classification, while C85400 brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5454 aluminum and the bottom bar is C85400 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 61 to 93
55
Elastic (Young's, Tensile) Modulus, GPa 69
100
Elongation at Break, % 2.3 to 18
23
Poisson's Ratio 0.33
0.32
Shear Modulus, GPa 26
40
Tensile Strength: Ultimate (UTS), MPa 230 to 350
220
Tensile Strength: Yield (Proof), MPa 97 to 290
85

Thermal Properties

Latent Heat of Fusion, J/g 400
180
Maximum Temperature: Mechanical, °C 190
130
Melting Completion (Liquidus), °C 650
940
Melting Onset (Solidus), °C 600
940
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 130
89
Thermal Expansion, µm/m-K 24
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
20
Electrical Conductivity: Equal Weight (Specific), % IACS 110
22

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
25
Density, g/cm3 2.7
8.3
Embodied Carbon, kg CO2/kg material 8.6
2.8
Embodied Energy, MJ/kg 150
46
Embodied Water, L/kg 1180
330

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.3 to 34
40
Resilience: Unit (Modulus of Resilience), kJ/m3 68 to 590
35
Stiffness to Weight: Axial, points 14
7.0
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 23 to 36
7.5
Strength to Weight: Bending, points 30 to 41
9.9
Thermal Diffusivity, mm2/s 55
28
Thermal Shock Resistance, points 10 to 16
7.6

Alloy Composition

Aluminum (Al), % 94.5 to 97.1
0 to 0.35
Chromium (Cr), % 0.050 to 0.2
0
Copper (Cu), % 0 to 0.1
65 to 70
Iron (Fe), % 0 to 0.4
0 to 0.7
Lead (Pb), % 0
1.5 to 3.8
Magnesium (Mg), % 2.4 to 3.0
0
Manganese (Mn), % 0.5 to 1.0
0
Nickel (Ni), % 0
0 to 1.0
Silicon (Si), % 0 to 0.25
0 to 0.050
Tin (Sn), % 0
0.5 to 1.5
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.25
24 to 32
Residuals, % 0
0 to 1.1