MakeItFrom.com
Menu (ESC)

5652 Aluminum vs. AISI 301 Stainless Steel

5652 aluminum belongs to the aluminum alloys classification, while AISI 301 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5652 aluminum and the bottom bar is AISI 301 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 47 to 77
190 to 440
Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 6.8 to 25
7.4 to 46
Fatigue Strength, MPa 60 to 140
210 to 600
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
77
Shear Strength, MPa 110 to 170
410 to 860
Tensile Strength: Ultimate (UTS), MPa 190 to 290
590 to 1460
Tensile Strength: Yield (Proof), MPa 74 to 260
230 to 1080

Thermal Properties

Latent Heat of Fusion, J/g 400
280
Maximum Temperature: Mechanical, °C 190
840
Melting Completion (Liquidus), °C 650
1420
Melting Onset (Solidus), °C 610
1400
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 140
16
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 120
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
13
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.6
2.7
Embodied Energy, MJ/kg 150
39
Embodied Water, L/kg 1190
130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12 to 39
99 to 300
Resilience: Unit (Modulus of Resilience), kJ/m3 40 to 480
130 to 2970
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 51
25
Strength to Weight: Axial, points 20 to 30
21 to 52
Strength to Weight: Bending, points 27 to 36
20 to 37
Thermal Diffusivity, mm2/s 57
4.2
Thermal Shock Resistance, points 8.4 to 13
12 to 31

Alloy Composition

Aluminum (Al), % 95.8 to 97.7
0
Carbon (C), % 0
0 to 0.15
Chromium (Cr), % 0.15 to 0.35
16 to 18
Copper (Cu), % 0 to 0.040
0
Iron (Fe), % 0 to 0.4
70.7 to 78
Magnesium (Mg), % 2.2 to 2.8
0
Manganese (Mn), % 0 to 0.010
0 to 2.0
Nickel (Ni), % 0
6.0 to 8.0
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.4
0 to 1.0
Sulfur (S), % 0
0 to 0.030
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0

Comparable Variants