MakeItFrom.com
Menu (ESC)

60Pd-40Ag Alloy vs. EN-MC95320 Magnesium

60Pd-40Ag alloy belongs to the otherwise unclassified metals classification, while EN-MC95320 magnesium belongs to the magnesium alloys. There are 21 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 60Pd-40Ag alloy and the bottom bar is EN-MC95320 magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
44
Elongation at Break, % 1.1 to 28
2.2
Poisson's Ratio 0.38
0.29
Shear Modulus, GPa 37
17
Shear Strength, MPa 220 to 350
140
Tensile Strength: Ultimate (UTS), MPa 340 to 720
250

Thermal Properties

Latent Heat of Fusion, J/g 140
330
Melting Completion (Liquidus), °C 1360
640
Melting Onset (Solidus), °C 1310
530
Specific Heat Capacity, J/kg-K 240
960
Thermal Conductivity, W/m-K 29
52
Thermal Expansion, µm/m-K 15
25

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 4.1
11
Electrical Conductivity: Equal Weight (Specific), % IACS 3.2
53

Otherwise Unclassified Properties

Density, g/cm3 11
1.9

Common Calculations

Stiffness to Weight: Axial, points 4.9
13
Stiffness to Weight: Bending, points 14
61
Strength to Weight: Axial, points 8.4 to 18
36
Strength to Weight: Bending, points 9.6 to 16
45
Thermal Diffusivity, mm2/s 11
28
Thermal Shock Resistance, points 16 to 34
16

Alloy Composition

Copper (Cu), % 0 to 0.1
0 to 0.030
Iron (Fe), % 0
0 to 0.010
Lithium (Li), % 0
0 to 0.2
Magnesium (Mg), % 0
89.7 to 93.5
Manganese (Mn), % 0
0 to 0.15
Nickel (Ni), % 0
0 to 0.0050
Palladium (Pd), % 59.5 to 60.9
0
Silicon (Si), % 0
0 to 0.010
Silver (Ag), % 39.1 to 40.5
0
Unspecified Rare Earths, % 0
2.4 to 4.4
Yttrium (Y), % 0
3.7 to 4.3
Zinc (Zn), % 0
0 to 0.2
Zirconium (Zr), % 0
0.4 to 1.0
Residuals, % 0
0 to 0.010