MakeItFrom.com
Menu (ESC)

6025 Aluminum vs. AWS BAg-19

6025 aluminum belongs to the aluminum alloys classification, while AWS BAg-19 belongs to the otherwise unclassified metals. There are 15 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6025 aluminum and the bottom bar is AWS BAg-19.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
74
Poisson's Ratio 0.33
0.37
Shear Modulus, GPa 26
27
Tensile Strength: Ultimate (UTS), MPa 190 to 240
140

Thermal Properties

Latent Heat of Fusion, J/g 410
120
Melting Completion (Liquidus), °C 650
890
Melting Onset (Solidus), °C 550
760
Specific Heat Capacity, J/kg-K 900
250
Thermal Expansion, µm/m-K 23
20

Otherwise Unclassified Properties

Density, g/cm3 2.8
10

Common Calculations

Stiffness to Weight: Axial, points 14
4.0
Stiffness to Weight: Bending, points 50
14
Strength to Weight: Axial, points 19 to 24
3.8
Strength to Weight: Bending, points 26 to 31
5.8
Thermal Shock Resistance, points 8.2 to 10
6.9

Alloy Composition

Aluminum (Al), % 91.7 to 96.3
0
Chromium (Cr), % 0 to 0.2
0
Copper (Cu), % 0.2 to 0.7
6.6 to 7.9
Iron (Fe), % 0 to 0.7
0
Lithium (Li), % 0
0.15 to 0.3
Magnesium (Mg), % 2.1 to 3.0
0
Manganese (Mn), % 0.6 to 1.4
0
Silicon (Si), % 0.8 to 1.5
0
Silver (Ag), % 0
92 to 93
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0
0 to 0.15