MakeItFrom.com
Menu (ESC)

6070 Aluminum vs. EN 1.4409 Stainless Steel

6070 aluminum belongs to the aluminum alloys classification, while EN 1.4409 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6070 aluminum and the bottom bar is EN 1.4409 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 5.6 to 8.6
34
Fatigue Strength, MPa 95 to 130
180
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
78
Tensile Strength: Ultimate (UTS), MPa 370 to 380
490
Tensile Strength: Yield (Proof), MPa 350
220

Thermal Properties

Latent Heat of Fusion, J/g 410
300
Maximum Temperature: Mechanical, °C 160
990
Melting Completion (Liquidus), °C 650
1440
Melting Onset (Solidus), °C 570
1390
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 160
15
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 41
2.1
Electrical Conductivity: Equal Weight (Specific), % IACS 140
2.5

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
19
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.3
3.7
Embodied Energy, MJ/kg 150
52
Embodied Water, L/kg 1170
160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 20 to 32
140
Resilience: Unit (Modulus of Resilience), kJ/m3 880 to 900
120
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 38
17
Strength to Weight: Bending, points 42 to 43
18
Thermal Diffusivity, mm2/s 65
4.1
Thermal Shock Resistance, points 16 to 17
11

Alloy Composition

Aluminum (Al), % 94.6 to 98
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0 to 0.1
18 to 20
Copper (Cu), % 0.15 to 0.4
0
Iron (Fe), % 0 to 0.5
61.7 to 71
Magnesium (Mg), % 0.5 to 1.2
0
Manganese (Mn), % 0.4 to 1.0
0 to 2.0
Molybdenum (Mo), % 0
2.0 to 2.5
Nickel (Ni), % 0
9.0 to 12
Nitrogen (N), % 0
0 to 0.2
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 1.0 to 1.7
0 to 1.5
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0