MakeItFrom.com
Menu (ESC)

6101B Aluminum vs. EN 1.6771 Steel

6101B aluminum belongs to the aluminum alloys classification, while EN 1.6771 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6101B aluminum and the bottom bar is EN 1.6771 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 9.1 to 13
8.0 to 8.7
Fatigue Strength, MPa 62 to 70
440 to 680
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Tensile Strength: Ultimate (UTS), MPa 190 to 250
930 to 1180
Tensile Strength: Yield (Proof), MPa 140 to 180
740 to 1140

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 160
440
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 630
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 210
46
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 57
8.0
Electrical Conductivity: Equal Weight (Specific), % IACS 190
9.2

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
5.0
Density, g/cm3 2.7
7.9
Embodied Carbon, kg CO2/kg material 8.3
1.9
Embodied Energy, MJ/kg 150
25
Embodied Water, L/kg 1190
58

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 20 to 23
75 to 93
Resilience: Unit (Modulus of Resilience), kJ/m3 140 to 240
1460 to 3450
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 20 to 25
33 to 41
Strength to Weight: Bending, points 27 to 32
27 to 31
Thermal Diffusivity, mm2/s 87
13
Thermal Shock Resistance, points 8.5 to 11
27 to 35

Alloy Composition

Aluminum (Al), % 98.2 to 99.3
0
Carbon (C), % 0
0.27 to 0.33
Chromium (Cr), % 0
0.8 to 1.2
Copper (Cu), % 0 to 0.050
0
Iron (Fe), % 0.1 to 0.3
92.2 to 95
Magnesium (Mg), % 0.35 to 0.6
0
Manganese (Mn), % 0 to 0.050
0.6 to 1.0
Molybdenum (Mo), % 0
0.3 to 0.6
Nickel (Ni), % 0
3.0 to 4.0
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.3 to 0.6
0 to 0.6
Sulfur (S), % 0
0 to 0.020
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.1
0

Comparable Variants