MakeItFrom.com
Menu (ESC)

6101B Aluminum vs. EN 1.7779 Steel

6101B aluminum belongs to the aluminum alloys classification, while EN 1.7779 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6101B aluminum and the bottom bar is EN 1.7779 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 9.1 to 13
16
Fatigue Strength, MPa 62 to 70
430
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 120 to 150
500
Tensile Strength: Ultimate (UTS), MPa 190 to 250
810
Tensile Strength: Yield (Proof), MPa 140 to 180
660

Thermal Properties

Latent Heat of Fusion, J/g 400
260
Maximum Temperature: Mechanical, °C 160
470
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 630
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 210
39
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 57
7.7
Electrical Conductivity: Equal Weight (Specific), % IACS 190
8.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
4.0
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.3
2.8
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1190
64

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 20 to 23
120
Resilience: Unit (Modulus of Resilience), kJ/m3 140 to 240
1150
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 20 to 25
29
Strength to Weight: Bending, points 27 to 32
25
Thermal Diffusivity, mm2/s 87
11
Thermal Shock Resistance, points 8.5 to 11
23

Alloy Composition

Aluminum (Al), % 98.2 to 99.3
0 to 0.040
Carbon (C), % 0
0.17 to 0.23
Chromium (Cr), % 0
3.0 to 3.3
Copper (Cu), % 0 to 0.050
0 to 0.3
Iron (Fe), % 0.1 to 0.3
93.8 to 95.4
Magnesium (Mg), % 0.35 to 0.6
0
Manganese (Mn), % 0 to 0.050
0.3 to 0.5
Molybdenum (Mo), % 0
0.5 to 0.6
Nickel (Ni), % 0
0 to 0.3
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0.3 to 0.6
0.15 to 0.35
Sulfur (S), % 0
0 to 0.010
Vanadium (V), % 0
0.45 to 0.55
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.1
0