MakeItFrom.com
Menu (ESC)

6360 Aluminum vs. C74500 Nickel Silver

6360 aluminum belongs to the aluminum alloys classification, while C74500 nickel silver belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6360 aluminum and the bottom bar is C74500 nickel silver.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
120
Elongation at Break, % 9.0 to 18
3.0 to 24
Poisson's Ratio 0.33
0.32
Shear Modulus, GPa 26
44
Shear Strength, MPa 76 to 130
310 to 380
Tensile Strength: Ultimate (UTS), MPa 120 to 220
390 to 700
Tensile Strength: Yield (Proof), MPa 57 to 170
380 to 600

Thermal Properties

Latent Heat of Fusion, J/g 400
190
Maximum Temperature: Mechanical, °C 160
170
Melting Completion (Liquidus), °C 640
1020
Melting Onset (Solidus), °C 630
970
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 210
45
Thermal Expansion, µm/m-K 23
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 54
9.0
Electrical Conductivity: Equal Weight (Specific), % IACS 180
9.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
29
Density, g/cm3 2.7
8.3
Embodied Carbon, kg CO2/kg material 8.3
3.4
Embodied Energy, MJ/kg 150
54
Embodied Water, L/kg 1190
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 14 to 19
12 to 160
Resilience: Unit (Modulus of Resilience), kJ/m3 24 to 210
620 to 1540
Stiffness to Weight: Axial, points 14
7.7
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 13 to 23
13 to 23
Strength to Weight: Bending, points 20 to 30
14 to 21
Thermal Diffusivity, mm2/s 86
14
Thermal Shock Resistance, points 5.5 to 9.9
13 to 23

Alloy Composition

Aluminum (Al), % 97.8 to 99.3
0
Chromium (Cr), % 0 to 0.050
0
Copper (Cu), % 0 to 0.15
63.5 to 66.5
Iron (Fe), % 0.1 to 0.3
0 to 0.25
Lead (Pb), % 0
0 to 0.1
Magnesium (Mg), % 0.25 to 0.45
0
Manganese (Mn), % 0.020 to 0.15
0 to 0.5
Nickel (Ni), % 0
9.0 to 11
Silicon (Si), % 0.35 to 0.8
0
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
21.2 to 27.5
Residuals, % 0
0 to 0.5