MakeItFrom.com
Menu (ESC)

7020 Aluminum vs. SAE-AISI S7 Steel

7020 aluminum belongs to the aluminum alloys classification, while SAE-AISI S7 steel belongs to the iron alloys. There are 23 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7020 aluminum and the bottom bar is SAE-AISI S7 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
74
Tensile Strength: Ultimate (UTS), MPa 190 to 390
670 to 2030

Thermal Properties

Latent Heat of Fusion, J/g 380
260
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 610
1420
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 150
40
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 39
7.8
Electrical Conductivity: Equal Weight (Specific), % IACS 120
9.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
5.0
Density, g/cm3 2.9
7.8
Embodied Carbon, kg CO2/kg material 8.3
2.3
Embodied Energy, MJ/kg 150
31
Embodied Water, L/kg 1150
65

Common Calculations

Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 47
25
Strength to Weight: Axial, points 18 to 37
24 to 72
Strength to Weight: Bending, points 25 to 41
22 to 46
Thermal Diffusivity, mm2/s 59
11
Thermal Shock Resistance, points 8.3 to 17
22 to 66

Alloy Composition

Aluminum (Al), % 91.2 to 94.8
0
Carbon (C), % 0
0.45 to 0.55
Chromium (Cr), % 0.1 to 0.35
3.0 to 3.5
Copper (Cu), % 0 to 0.2
0 to 0.25
Iron (Fe), % 0 to 0.4
91.6 to 94.9
Magnesium (Mg), % 1.0 to 1.4
0
Manganese (Mn), % 0.050 to 0.5
0.2 to 0.9
Molybdenum (Mo), % 0
1.3 to 1.8
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.35
0.2 to 1.0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Vanadium (V), % 0
0 to 0.3
Zinc (Zn), % 4.0 to 5.0
0
Zirconium (Zr), % 0.080 to 0.25
0
Residuals, % 0 to 0.15
0

Comparable Variants