MakeItFrom.com
Menu (ESC)

7049 Aluminum vs. EN 1.4301 Stainless Steel

7049 aluminum belongs to the aluminum alloys classification, while EN 1.4301 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7049 aluminum and the bottom bar is EN 1.4301 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 140
190 to 270
Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 6.2 to 7.0
14 to 46
Fatigue Strength, MPa 160 to 170
200 to 330
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 27
77
Shear Strength, MPa 300 to 310
430 to 550
Tensile Strength: Ultimate (UTS), MPa 510 to 530
610 to 900
Tensile Strength: Yield (Proof), MPa 420 to 450
220 to 570

Thermal Properties

Latent Heat of Fusion, J/g 370
290
Maximum Temperature: Mechanical, °C 180
940
Melting Completion (Liquidus), °C 640
1430
Melting Onset (Solidus), °C 480
1380
Specific Heat Capacity, J/kg-K 860
480
Thermal Conductivity, W/m-K 130
15
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 36
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 110
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 10
15
Density, g/cm3 3.1
7.8
Embodied Carbon, kg CO2/kg material 8.1
3.0
Embodied Energy, MJ/kg 140
43
Embodied Water, L/kg 1110
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 31 to 34
110 to 220
Resilience: Unit (Modulus of Resilience), kJ/m3 1270 to 1440
120 to 820
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 45
25
Strength to Weight: Axial, points 46 to 47
22 to 32
Strength to Weight: Bending, points 46 to 47
20 to 27
Thermal Diffusivity, mm2/s 51
4.0
Thermal Shock Resistance, points 22 to 23
14 to 20

Alloy Composition

Aluminum (Al), % 85.7 to 89.5
0
Carbon (C), % 0
0 to 0.070
Chromium (Cr), % 0.1 to 0.22
17.5 to 19.5
Copper (Cu), % 1.2 to 1.9
0
Iron (Fe), % 0 to 0.35
66.8 to 74.5
Magnesium (Mg), % 2.0 to 2.9
0
Manganese (Mn), % 0 to 0.2
0 to 2.0
Nickel (Ni), % 0
8.0 to 10.5
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.25
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 7.2 to 8.2
0
Residuals, % 0 to 0.15
0

Comparable Variants