MakeItFrom.com
Menu (ESC)

7049 Aluminum vs. SAE-AISI A7 Steel

7049 aluminum belongs to the aluminum alloys classification, while SAE-AISI A7 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7049 aluminum and the bottom bar is SAE-AISI A7 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Poisson's Ratio 0.32
0.29
Shear Modulus, GPa 27
72
Tensile Strength: Ultimate (UTS), MPa 510 to 530
800 to 2150

Thermal Properties

Latent Heat of Fusion, J/g 370
260
Melting Completion (Liquidus), °C 640
1470
Melting Onset (Solidus), °C 480
1430
Specific Heat Capacity, J/kg-K 860
470
Thermal Conductivity, W/m-K 130
37
Thermal Expansion, µm/m-K 23
12

Otherwise Unclassified Properties

Base Metal Price, % relative 10
10
Density, g/cm3 3.1
7.7
Embodied Carbon, kg CO2/kg material 8.1
13
Embodied Energy, MJ/kg 140
200
Embodied Water, L/kg 1110
100

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 45
25
Strength to Weight: Axial, points 46 to 47
29 to 77
Strength to Weight: Bending, points 46 to 47
25 to 48
Thermal Diffusivity, mm2/s 51
10
Thermal Shock Resistance, points 22 to 23
27 to 72

Alloy Composition

Aluminum (Al), % 85.7 to 89.5
0
Carbon (C), % 0
2.0 to 2.9
Chromium (Cr), % 0.1 to 0.22
5.0 to 5.8
Copper (Cu), % 1.2 to 1.9
0 to 0.25
Iron (Fe), % 0 to 0.35
81.4 to 87.7
Magnesium (Mg), % 2.0 to 2.9
0
Manganese (Mn), % 0 to 0.2
0 to 0.8
Molybdenum (Mo), % 0
0.9 to 1.4
Nickel (Ni), % 0
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.25
0 to 0.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0
Tungsten (W), % 0
0.5 to 1.5
Vanadium (V), % 0
3.9 to 5.2
Zinc (Zn), % 7.2 to 8.2
0
Residuals, % 0 to 0.15
0