MakeItFrom.com
Menu (ESC)

705.0 Aluminum vs. N08904 Stainless Steel

705.0 aluminum belongs to the aluminum alloys classification, while N08904 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 705.0 aluminum and the bottom bar is N08904 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 62 to 65
170
Elastic (Young's, Tensile) Modulus, GPa 69
200
Elongation at Break, % 8.4 to 10
38
Fatigue Strength, MPa 63 to 98
200
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
79
Tensile Strength: Ultimate (UTS), MPa 240 to 260
540
Tensile Strength: Yield (Proof), MPa 130
240

Thermal Properties

Latent Heat of Fusion, J/g 390
300
Maximum Temperature: Mechanical, °C 180
1100
Melting Completion (Liquidus), °C 640
1440
Melting Onset (Solidus), °C 610
1390
Specific Heat Capacity, J/kg-K 890
470
Thermal Conductivity, W/m-K 140
12
Thermal Expansion, µm/m-K 24
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 110
1.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
32
Density, g/cm3 2.8
8.1
Embodied Carbon, kg CO2/kg material 8.4
5.8
Embodied Energy, MJ/kg 150
79
Embodied Water, L/kg 1170
200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 18 to 20
170
Resilience: Unit (Modulus of Resilience), kJ/m3 120 to 130
150
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 49
24
Strength to Weight: Axial, points 24 to 26
19
Strength to Weight: Bending, points 31 to 32
18
Thermal Diffusivity, mm2/s 55
3.1
Thermal Shock Resistance, points 11
12

Alloy Composition

Aluminum (Al), % 92.3 to 98.6
0
Carbon (C), % 0
0 to 0.020
Chromium (Cr), % 0 to 0.4
19 to 23
Copper (Cu), % 0 to 0.2
1.0 to 2.0
Iron (Fe), % 0 to 0.8
38.8 to 53
Magnesium (Mg), % 1.4 to 1.8
0
Manganese (Mn), % 0 to 0.6
0 to 2.0
Molybdenum (Mo), % 0
4.0 to 5.0
Nickel (Ni), % 0
23 to 28
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.2
0 to 1.0
Sulfur (S), % 0
0 to 0.035
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 3.3
0
Residuals, % 0 to 0.15
0