MakeItFrom.com
Menu (ESC)

7475 Aluminum vs. SAE-AISI 1070 Steel

7475 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1070 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7475 aluminum and the bottom bar is SAE-AISI 1070 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 10 to 12
10 to 13
Fatigue Strength, MPa 190 to 210
270 to 350
Poisson's Ratio 0.32
0.29
Shear Modulus, GPa 26
72
Shear Strength, MPa 320 to 350
380 to 460
Tensile Strength: Ultimate (UTS), MPa 530 to 590
640 to 760
Tensile Strength: Yield (Proof), MPa 440 to 520
420 to 560

Thermal Properties

Latent Heat of Fusion, J/g 380
250
Maximum Temperature: Mechanical, °C 180
400
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 480
1420
Specific Heat Capacity, J/kg-K 870
470
Thermal Conductivity, W/m-K 140 to 160
50
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 33 to 42
10
Electrical Conductivity: Equal Weight (Specific), % IACS 98 to 120
12

Otherwise Unclassified Properties

Base Metal Price, % relative 10
1.8
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.2
1.4
Embodied Energy, MJ/kg 150
19
Embodied Water, L/kg 1130
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 53 to 68
59 to 86
Resilience: Unit (Modulus of Resilience), kJ/m3 1390 to 1920
470 to 850
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 49 to 55
23 to 27
Strength to Weight: Bending, points 48 to 52
21 to 24
Thermal Diffusivity, mm2/s 53 to 63
14
Thermal Shock Resistance, points 23 to 26
21 to 25

Alloy Composition

Aluminum (Al), % 88.6 to 91.6
0
Carbon (C), % 0
0.65 to 0.75
Chromium (Cr), % 0.18 to 0.25
0
Copper (Cu), % 1.2 to 1.9
0
Iron (Fe), % 0 to 0.12
98.3 to 98.8
Magnesium (Mg), % 1.9 to 2.6
0
Manganese (Mn), % 0 to 0.060
0.6 to 0.9
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.1
0
Sulfur (S), % 0
0 to 0.050
Titanium (Ti), % 0 to 0.060
0
Zinc (Zn), % 5.1 to 6.2
0
Residuals, % 0 to 0.15
0