MakeItFrom.com
Menu (ESC)

771.0 Aluminum vs. EN 1.4872 Stainless Steel

771.0 aluminum belongs to the aluminum alloys classification, while EN 1.4872 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 771.0 aluminum and the bottom bar is EN 1.4872 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 85 to 120
270
Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 1.7 to 6.5
28
Fatigue Strength, MPa 92 to 180
410
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 26
79
Tensile Strength: Ultimate (UTS), MPa 250 to 370
950
Tensile Strength: Yield (Proof), MPa 210 to 350
560

Thermal Properties

Latent Heat of Fusion, J/g 380
300
Maximum Temperature: Mechanical, °C 180
1150
Melting Completion (Liquidus), °C 630
1390
Melting Onset (Solidus), °C 620
1340
Specific Heat Capacity, J/kg-K 870
490
Thermal Conductivity, W/m-K 140 to 150
15
Thermal Expansion, µm/m-K 24
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 27
2.3
Electrical Conductivity: Equal Weight (Specific), % IACS 82
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
17
Density, g/cm3 3.0
7.6
Embodied Carbon, kg CO2/kg material 8.0
3.3
Embodied Energy, MJ/kg 150
47
Embodied Water, L/kg 1130
180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.4 to 20
230
Resilience: Unit (Modulus of Resilience), kJ/m3 310 to 900
780
Stiffness to Weight: Axial, points 13
15
Stiffness to Weight: Bending, points 46
26
Strength to Weight: Axial, points 23 to 35
35
Strength to Weight: Bending, points 29 to 39
28
Thermal Diffusivity, mm2/s 54 to 58
3.9
Thermal Shock Resistance, points 11 to 16
21

Alloy Composition

Aluminum (Al), % 90.5 to 92.5
0
Carbon (C), % 0
0.2 to 0.3
Chromium (Cr), % 0.060 to 0.2
24 to 26
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.15
54.2 to 61.6
Magnesium (Mg), % 0.8 to 1.0
0
Manganese (Mn), % 0 to 0.1
8.0 to 10
Nickel (Ni), % 0
6.0 to 8.0
Nitrogen (N), % 0
0.2 to 0.4
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.15
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0.1 to 0.2
0
Zinc (Zn), % 6.5 to 7.5
0
Residuals, % 0 to 0.15
0