MakeItFrom.com
Menu (ESC)

771.0 Aluminum vs. EN 1.4971 Stainless Steel

771.0 aluminum belongs to the aluminum alloys classification, while EN 1.4971 stainless steel belongs to the iron alloys. There are 28 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 771.0 aluminum and the bottom bar is EN 1.4971 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 85 to 120
240
Elastic (Young's, Tensile) Modulus, GPa 70
210
Elongation at Break, % 1.7 to 6.5
34
Fatigue Strength, MPa 92 to 180
270
Poisson's Ratio 0.32
0.29
Shear Modulus, GPa 26
81
Tensile Strength: Ultimate (UTS), MPa 250 to 370
800
Tensile Strength: Yield (Proof), MPa 210 to 350
340

Thermal Properties

Latent Heat of Fusion, J/g 380
300
Maximum Temperature: Mechanical, °C 180
1100
Melting Completion (Liquidus), °C 630
1460
Melting Onset (Solidus), °C 620
1410
Specific Heat Capacity, J/kg-K 870
450
Thermal Conductivity, W/m-K 140 to 150
13
Thermal Expansion, µm/m-K 24
15

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
70
Density, g/cm3 3.0
8.4
Embodied Carbon, kg CO2/kg material 8.0
7.6
Embodied Energy, MJ/kg 150
110
Embodied Water, L/kg 1130
300

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.4 to 20
220
Resilience: Unit (Modulus of Resilience), kJ/m3 310 to 900
280
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 23 to 35
26
Strength to Weight: Bending, points 29 to 39
23
Thermal Diffusivity, mm2/s 54 to 58
3.4
Thermal Shock Resistance, points 11 to 16
19

Alloy Composition

Aluminum (Al), % 90.5 to 92.5
0
Carbon (C), % 0
0.080 to 0.16
Chromium (Cr), % 0.060 to 0.2
20 to 22.5
Cobalt (Co), % 0
18.5 to 21
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.15
24.3 to 37.1
Magnesium (Mg), % 0.8 to 1.0
0
Manganese (Mn), % 0 to 0.1
0 to 2.0
Molybdenum (Mo), % 0
2.5 to 3.5
Nickel (Ni), % 0
19 to 21
Niobium (Nb), % 0
0.75 to 1.3
Nitrogen (N), % 0
0.1 to 0.2
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.15
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0.1 to 0.2
0
Tungsten (W), % 0
2.0 to 3.0
Zinc (Zn), % 6.5 to 7.5
0
Residuals, % 0 to 0.15
0