MakeItFrom.com
Menu (ESC)

A535.0 Aluminum vs. AISI 201LN Stainless Steel

A535.0 aluminum belongs to the aluminum alloys classification, while AISI 201LN stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is A535.0 aluminum and the bottom bar is AISI 201LN stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 67
200
Elongation at Break, % 9.0
25 to 51
Fatigue Strength, MPa 95
340 to 540
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 25
77
Tensile Strength: Ultimate (UTS), MPa 250
740 to 1060
Tensile Strength: Yield (Proof), MPa 120
350 to 770

Thermal Properties

Latent Heat of Fusion, J/g 390
280
Maximum Temperature: Mechanical, °C 170
880
Melting Completion (Liquidus), °C 620
1410
Melting Onset (Solidus), °C 550
1370
Specific Heat Capacity, J/kg-K 910
480
Thermal Conductivity, W/m-K 100
15
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 23
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 79
2.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
12
Density, g/cm3 2.6
7.7
Embodied Carbon, kg CO2/kg material 9.3
2.6
Embodied Energy, MJ/kg 160
38
Embodied Water, L/kg 1180
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 19
230 to 310
Resilience: Unit (Modulus of Resilience), kJ/m3 120
310 to 1520
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 51
25
Strength to Weight: Axial, points 26
27 to 38
Strength to Weight: Bending, points 33
24 to 30
Thermal Diffusivity, mm2/s 42
4.0
Thermal Shock Resistance, points 11
16 to 23

Alloy Composition

Aluminum (Al), % 91.4 to 93.4
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0
16 to 17.5
Copper (Cu), % 0 to 0.1
0 to 1.0
Iron (Fe), % 0 to 0.2
67.9 to 73.5
Magnesium (Mg), % 6.5 to 7.5
0
Manganese (Mn), % 0.1 to 0.25
6.4 to 7.5
Nickel (Ni), % 0
4.0 to 5.0
Nitrogen (N), % 0
0.1 to 0.25
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.2
0 to 0.75
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.25
0
Residuals, % 0 to 0.15
0