MakeItFrom.com
Menu (ESC)

ACI-ASTM CE8MN Steel vs. 1060 Aluminum

ACI-ASTM CE8MN steel belongs to the iron alloys classification, while 1060 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ACI-ASTM CE8MN steel and the bottom bar is 1060 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 29
1.1 to 30
Fatigue Strength, MPa 370
15 to 50
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 80
26
Tensile Strength: Ultimate (UTS), MPa 750
67 to 130
Tensile Strength: Yield (Proof), MPa 500
17 to 110

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1100
170
Melting Completion (Liquidus), °C 1440
660
Melting Onset (Solidus), °C 1400
650
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 16
230
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
62
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
210

Otherwise Unclassified Properties

Base Metal Price, % relative 21
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 4.2
8.3
Embodied Energy, MJ/kg 58
160
Embodied Water, L/kg 180
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 190
0.57 to 37
Resilience: Unit (Modulus of Resilience), kJ/m3 620
2.1 to 89
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 27
6.9 to 13
Strength to Weight: Bending, points 23
14 to 21
Thermal Diffusivity, mm2/s 4.2
96
Thermal Shock Resistance, points 21
3.0 to 5.6

Alloy Composition

Aluminum (Al), % 0
99.6 to 100
Carbon (C), % 0 to 0.080
0
Chromium (Cr), % 22.5 to 25.5
0
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 56 to 66.4
0 to 0.35
Magnesium (Mg), % 0
0 to 0.030
Manganese (Mn), % 0 to 1.0
0 to 0.030
Molybdenum (Mo), % 3.0 to 4.5
0
Nickel (Ni), % 8.0 to 11
0
Nitrogen (N), % 0.1 to 0.3
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.5
0 to 0.25
Sulfur (S), % 0 to 0.040
0
Titanium (Ti), % 0
0 to 0.030
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.050