MakeItFrom.com
Menu (ESC)

AISI 420 Stainless Steel vs. EN AC-51100 Aluminum

AISI 420 stainless steel belongs to the iron alloys classification, while EN AC-51100 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 420 stainless steel and the bottom bar is EN AC-51100 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190
57
Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 8.0 to 15
4.5
Fatigue Strength, MPa 220 to 670
58
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Tensile Strength: Ultimate (UTS), MPa 690 to 1720
160
Tensile Strength: Yield (Proof), MPa 380 to 1310
80

Thermal Properties

Latent Heat of Fusion, J/g 280
400
Maximum Temperature: Mechanical, °C 620
170
Melting Completion (Liquidus), °C 1510
640
Melting Onset (Solidus), °C 1450
620
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 27
130
Thermal Expansion, µm/m-K 10
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 3.0
34
Electrical Conductivity: Equal Weight (Specific), % IACS 3.5
110

Otherwise Unclassified Properties

Base Metal Price, % relative 7.5
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.0
8.7
Embodied Energy, MJ/kg 28
150
Embodied Water, L/kg 100
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 88 to 130
6.0
Resilience: Unit (Modulus of Resilience), kJ/m3 380 to 4410
47
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 25 to 62
17
Strength to Weight: Bending, points 22 to 41
25
Thermal Diffusivity, mm2/s 7.3
53
Thermal Shock Resistance, points 25 to 62
7.3

Alloy Composition

Aluminum (Al), % 0
94.5 to 97.5
Carbon (C), % 0.15 to 0.4
0
Chromium (Cr), % 12 to 14
0
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 82.3 to 87.9
0 to 0.55
Magnesium (Mg), % 0
2.5 to 3.5
Manganese (Mn), % 0 to 1.0
0 to 0.45
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 0 to 0.75
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0 to 0.55
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15