MakeItFrom.com
Menu (ESC)

AISI 430F Stainless Steel vs. 332.0 Aluminum

AISI 430F stainless steel belongs to the iron alloys classification, while 332.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 430F stainless steel and the bottom bar is 332.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 230
110
Elastic (Young's, Tensile) Modulus, GPa 200
73
Elongation at Break, % 23
1.0
Fatigue Strength, MPa 210
90
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
27
Shear Strength, MPa 340
190
Tensile Strength: Ultimate (UTS), MPa 540
250
Tensile Strength: Yield (Proof), MPa 310
190

Thermal Properties

Latent Heat of Fusion, J/g 280
530
Maximum Temperature: Mechanical, °C 870
170
Melting Completion (Liquidus), °C 1430
580
Melting Onset (Solidus), °C 1390
530
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 25
100
Thermal Expansion, µm/m-K 10
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.8
26
Electrical Conductivity: Equal Weight (Specific), % IACS 3.3
84

Otherwise Unclassified Properties

Base Metal Price, % relative 8.5
10
Density, g/cm3 7.7
2.8
Embodied Carbon, kg CO2/kg material 2.1
7.8
Embodied Energy, MJ/kg 29
140
Embodied Water, L/kg 120
1040

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110
2.3
Resilience: Unit (Modulus of Resilience), kJ/m3 250
250
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 20
24
Strength to Weight: Bending, points 19
31
Thermal Diffusivity, mm2/s 6.7
42
Thermal Shock Resistance, points 19
12

Alloy Composition

Aluminum (Al), % 0
80.1 to 89
Carbon (C), % 0 to 0.12
0
Chromium (Cr), % 16 to 18
0
Copper (Cu), % 0
2.0 to 4.0
Iron (Fe), % 79.2 to 83.9
0 to 1.2
Magnesium (Mg), % 0
0.5 to 1.5
Manganese (Mn), % 0 to 1.3
0 to 0.5
Nickel (Ni), % 0
0 to 0.5
Phosphorus (P), % 0 to 0.060
0
Silicon (Si), % 0 to 1.0
8.5 to 10.5
Sulfur (S), % 0.15 to 0.35
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 1.0
Residuals, % 0
0 to 0.5