MakeItFrom.com
Menu (ESC)

AM50A Magnesium vs. EN 1.1122 Steel

AM50A magnesium belongs to the magnesium alloys classification, while EN 1.1122 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AM50A magnesium and the bottom bar is EN 1.1122 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 58
100 to 130
Elastic (Young's, Tensile) Modulus, GPa 45
190
Elongation at Break, % 11
12 to 21
Fatigue Strength, MPa 70
170 to 260
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 17
73
Shear Strength, MPa 120
240 to 290
Tensile Strength: Ultimate (UTS), MPa 210
340 to 460
Tensile Strength: Yield (Proof), MPa 120
240 to 370

Thermal Properties

Latent Heat of Fusion, J/g 350
250
Maximum Temperature: Mechanical, °C 120
400
Melting Completion (Liquidus), °C 620
1460
Melting Onset (Solidus), °C 570
1420
Specific Heat Capacity, J/kg-K 1000
470
Thermal Conductivity, W/m-K 65
51
Thermal Expansion, µm/m-K 26
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 16
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 88
8.0

Otherwise Unclassified Properties

Base Metal Price, % relative 12
1.8
Density, g/cm3 1.7
7.9
Embodied Carbon, kg CO2/kg material 23
1.4
Embodied Energy, MJ/kg 160
18
Embodied Water, L/kg 990
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 19
36 to 89
Resilience: Unit (Modulus of Resilience), kJ/m3 150
160 to 360
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 71
24
Strength to Weight: Axial, points 35
12 to 16
Strength to Weight: Bending, points 47
14 to 17
Thermal Diffusivity, mm2/s 39
14
Thermal Shock Resistance, points 13
11 to 15

Alloy Composition

Aluminum (Al), % 4.4 to 5.4
0
Carbon (C), % 0
0.080 to 0.12
Copper (Cu), % 0 to 0.010
0 to 0.25
Iron (Fe), % 0 to 0.0040
98.7 to 99.62
Magnesium (Mg), % 93.7 to 95.3
0
Manganese (Mn), % 0.26 to 0.6
0.3 to 0.6
Nickel (Ni), % 0 to 0.0020
0
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0 to 0.1
0 to 0.3
Sulfur (S), % 0
0 to 0.025
Zinc (Zn), % 0 to 0.22
0