MakeItFrom.com
Menu (ESC)

AM60A Magnesium vs. EN 1.4835 Stainless Steel

AM60A magnesium belongs to the magnesium alloys classification, while EN 1.4835 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AM60A magnesium and the bottom bar is EN 1.4835 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 62
180
Elastic (Young's, Tensile) Modulus, GPa 45
200
Elongation at Break, % 8.8
43
Fatigue Strength, MPa 70
310
Poisson's Ratio 0.29
0.28
Shear Modulus, GPa 18
77
Shear Strength, MPa 130
520
Tensile Strength: Ultimate (UTS), MPa 230
750
Tensile Strength: Yield (Proof), MPa 130
350

Thermal Properties

Latent Heat of Fusion, J/g 350
320
Maximum Temperature: Mechanical, °C 120
1150
Melting Completion (Liquidus), °C 620
1400
Melting Onset (Solidus), °C 550
1360
Specific Heat Capacity, J/kg-K 1000
490
Thermal Conductivity, W/m-K 62
15
Thermal Expansion, µm/m-K 26
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 13
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 69
2.4

Otherwise Unclassified Properties

Base Metal Price, % relative 12
17
Density, g/cm3 1.7
7.7
Embodied Carbon, kg CO2/kg material 23
3.3
Embodied Energy, MJ/kg 160
47
Embodied Water, L/kg 990
160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 17
270
Resilience: Unit (Modulus of Resilience), kJ/m3 190
310
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 71
25
Strength to Weight: Axial, points 37
27
Strength to Weight: Bending, points 49
24
Thermal Diffusivity, mm2/s 37
4.0
Thermal Shock Resistance, points 14
16

Alloy Composition

Aluminum (Al), % 5.5 to 6.5
0
Carbon (C), % 0
0.050 to 0.12
Cerium (Ce), % 0
0.030 to 0.080
Chromium (Cr), % 0
20 to 22
Copper (Cu), % 0 to 0.35
0
Iron (Fe), % 0
62 to 68.4
Magnesium (Mg), % 91.8 to 94.4
0
Manganese (Mn), % 0.13 to 0.6
0 to 1.0
Nickel (Ni), % 0 to 0.030
10 to 12
Nitrogen (N), % 0
0.12 to 0.2
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.5
1.4 to 2.5
Sulfur (S), % 0
0 to 0.015
Zinc (Zn), % 0 to 0.22
0