MakeItFrom.com
Menu (ESC)

AM60B Magnesium vs. SAE-AISI F2 Steel

AM60B magnesium belongs to the magnesium alloys classification, while SAE-AISI F2 steel belongs to the iron alloys. There are 23 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AM60B magnesium and the bottom bar is SAE-AISI F2 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
190
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 17
73
Tensile Strength: Ultimate (UTS), MPa 230
710 to 2360

Thermal Properties

Latent Heat of Fusion, J/g 350
250
Melting Completion (Liquidus), °C 620
1520
Melting Onset (Solidus), °C 540
1470
Specific Heat Capacity, J/kg-K 1000
460
Thermal Conductivity, W/m-K 61
42
Thermal Expansion, µm/m-K 26
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 13
7.7
Electrical Conductivity: Equal Weight (Specific), % IACS 72
8.5

Otherwise Unclassified Properties

Base Metal Price, % relative 12
10
Density, g/cm3 1.7
8.1
Embodied Carbon, kg CO2/kg material 23
2.3
Embodied Energy, MJ/kg 160
32
Embodied Water, L/kg 990
50

Common Calculations

Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 71
24
Strength to Weight: Axial, points 38
24 to 81
Strength to Weight: Bending, points 50
22 to 49
Thermal Diffusivity, mm2/s 37
11
Thermal Shock Resistance, points 14
21 to 71

Alloy Composition

Aluminum (Al), % 5.5 to 6.5
0
Carbon (C), % 0
1.2 to 1.4
Chromium (Cr), % 0
0.2 to 0.4
Copper (Cu), % 0 to 0.010
0
Iron (Fe), % 0 to 0.0050
92.6 to 95.4
Magnesium (Mg), % 92.6 to 94.3
0
Manganese (Mn), % 0.24 to 0.6
0.1 to 0.5
Nickel (Ni), % 0 to 0.0020
0
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.1
0.1 to 0.5
Sulfur (S), % 0
0 to 0.030
Tungsten (W), % 0
3.0 to 4.5
Zinc (Zn), % 0 to 0.22
0