MakeItFrom.com
Menu (ESC)

AS41A Magnesium vs. EN 1.4724 Stainless Steel

AS41A magnesium belongs to the magnesium alloys classification, while EN 1.4724 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AS41A magnesium and the bottom bar is EN 1.4724 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
190
Elongation at Break, % 11
16
Fatigue Strength, MPa 100
170
Poisson's Ratio 0.29
0.28
Shear Modulus, GPa 17
75
Shear Strength, MPa 130
340
Tensile Strength: Ultimate (UTS), MPa 230
550
Tensile Strength: Yield (Proof), MPa 140
280

Thermal Properties

Latent Heat of Fusion, J/g 370
290
Maximum Temperature: Mechanical, °C 110
850
Melting Completion (Liquidus), °C 620
1430
Melting Onset (Solidus), °C 570
1390
Specific Heat Capacity, J/kg-K 1000
490
Thermal Conductivity, W/m-K 68
21
Thermal Expansion, µm/m-K 26
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 17
2.3
Electrical Conductivity: Equal Weight (Specific), % IACS 92
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 12
7.0
Density, g/cm3 1.6
7.7
Embodied Carbon, kg CO2/kg material 23
2.0
Embodied Energy, MJ/kg 160
28
Embodied Water, L/kg 980
110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21
73
Resilience: Unit (Modulus of Resilience), kJ/m3 220
210
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 72
25
Strength to Weight: Axial, points 38
20
Strength to Weight: Bending, points 50
19
Thermal Diffusivity, mm2/s 41
5.6
Thermal Shock Resistance, points 14
19

Alloy Composition

Aluminum (Al), % 3.5 to 5.0
0.7 to 1.2
Carbon (C), % 0
0 to 0.12
Chromium (Cr), % 0
12 to 14
Copper (Cu), % 0 to 0.060
0
Iron (Fe), % 0
82.2 to 86.6
Magnesium (Mg), % 92.8 to 95.8
0
Manganese (Mn), % 0.2 to 0.5
0 to 1.0
Nickel (Ni), % 0 to 0.030
0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0.5 to 1.5
0.7 to 1.4
Sulfur (S), % 0
0 to 0.015
Zinc (Zn), % 0 to 0.12
0