MakeItFrom.com
Menu (ESC)

ASTM A356 Grade 1 vs. Grade TDC Steel

Both ASTM A356 grade 1 and grade TDC steel are iron alloys. Their average alloy composition is basically identical. There are 25 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown.

For each property being compared, the top bar is ASTM A356 grade 1 and the bottom bar is grade TDC steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
190
Poisson's Ratio 0.29
0.29
Reduction in Area, % 39
50
Shear Modulus, GPa 73
80
Tensile Strength: Ultimate (UTS), MPa 550
1700

Thermal Properties

Latent Heat of Fusion, J/g 250
250
Maximum Temperature: Mechanical, °C 400
400
Melting Completion (Liquidus), °C 1460
1450
Melting Onset (Solidus), °C 1420
1410
Specific Heat Capacity, J/kg-K 470
470
Thermal Conductivity, W/m-K 51
51
Thermal Expansion, µm/m-K 12
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.0
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 8.1
8.2

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
1.9
Density, g/cm3 7.8
7.8
Embodied Carbon, kg CO2/kg material 1.4
1.4
Embodied Energy, MJ/kg 18
19
Embodied Water, L/kg 45
47

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
24
Strength to Weight: Axial, points 20
60
Strength to Weight: Bending, points 19
40
Thermal Diffusivity, mm2/s 14
14
Thermal Shock Resistance, points 18
50

Alloy Composition

Carbon (C), % 0 to 0.35
0.6 to 0.75
Chromium (Cr), % 0
0 to 0.3
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 98.3 to 100
98 to 99.4
Manganese (Mn), % 0 to 0.7
0.5 to 1.2
Phosphorus (P), % 0 to 0.035
0 to 0.020
Silicon (Si), % 0 to 0.6
0.1 to 0.35
Sulfur (S), % 0 to 0.030
0 to 0.020