MakeItFrom.com
Menu (ESC)

ASTM B563 Pd-Ag-Cu vs. ISO-WD32260 Magnesium

ASTM B563 Pd-Ag-Cu belongs to the otherwise unclassified metals classification, while ISO-WD32260 magnesium belongs to the magnesium alloys. There are 19 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ASTM B563 Pd-Ag-Cu and the bottom bar is ISO-WD32260 magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
46
Elongation at Break, % 7.0 to 17
4.5 to 6.0
Poisson's Ratio 0.37
0.29
Shear Modulus, GPa 37
18
Shear Strength, MPa 470 to 690
190 to 200
Tensile Strength: Ultimate (UTS), MPa 760 to 1170
330 to 340

Thermal Properties

Latent Heat of Fusion, J/g 150
330
Melting Completion (Liquidus), °C 1180
600
Melting Onset (Solidus), °C 1030
520
Specific Heat Capacity, J/kg-K 260
970
Thermal Expansion, µm/m-K 14
27

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 5.6 to 6.7
28
Electrical Conductivity: Equal Weight (Specific), % IACS 4.6 to 5.5
140

Otherwise Unclassified Properties

Density, g/cm3 11
1.9

Common Calculations

Stiffness to Weight: Axial, points 5.2
13
Stiffness to Weight: Bending, points 14
63
Strength to Weight: Axial, points 19 to 30
48 to 51
Strength to Weight: Bending, points 17 to 22
56 to 58
Thermal Shock Resistance, points 39 to 61
19 to 20

Alloy Composition

Copper (Cu), % 15.5 to 16.5
0
Magnesium (Mg), % 0
92.7 to 94.8
Nickel (Ni), % 0.8 to 1.2
0
Palladium (Pd), % 43 to 45
0
Platinum (Pt), % 0.8 to 1.2
0
Silver (Ag), % 37 to 39
0
Zinc (Zn), % 0
4.8 to 6.2
Zirconium (Zr), % 0
0.45 to 0.8
Residuals, % 0
0 to 0.3