MakeItFrom.com
Menu (ESC)

ASTM B596 Au-Cu vs. R30006 Cobalt

ASTM B596 Au-Cu belongs to the otherwise unclassified metals classification, while R30006 cobalt belongs to the cobalt alloys. There are 18 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ASTM B596 Au-Cu and the bottom bar is R30006 cobalt.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
220
Elongation at Break, % 4.3 to 17
1.0
Poisson's Ratio 0.41
0.28
Shear Modulus, GPa 36
85
Tensile Strength: Ultimate (UTS), MPa 450 to 620
900

Thermal Properties

Latent Heat of Fusion, J/g 77
320
Melting Completion (Liquidus), °C 1060
1400
Melting Onset (Solidus), °C 930
1290
Specific Heat Capacity, J/kg-K 150
450
Thermal Expansion, µm/m-K 14
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 14
1.6
Electrical Conductivity: Equal Weight (Specific), % IACS 6.7
1.7

Otherwise Unclassified Properties

Density, g/cm3 18
8.6

Common Calculations

Stiffness to Weight: Axial, points 3.1
14
Stiffness to Weight: Bending, points 8.5
23
Strength to Weight: Axial, points 6.8 to 9.4
29
Strength to Weight: Bending, points 7.1 to 8.8
24
Thermal Shock Resistance, points 22 to 30
26

Alloy Composition

Carbon (C), % 0
0.9 to 1.4
Chromium (Cr), % 0
27 to 32
Cobalt (Co), % 0
48.6 to 68.1
Copper (Cu), % 9.0 to 11
0
Gold (Au), % 89 to 91
0
Iron (Fe), % 0
0 to 3.0
Molybdenum (Mo), % 0
0 to 1.0
Nickel (Ni), % 0
0 to 3.0
Silicon (Si), % 0
0 to 2.0
Tungsten (W), % 0
4.0 to 6.0
Residuals, % 0 to 0.4
0