MakeItFrom.com
Menu (ESC)

AZ31C Magnesium vs. K94200 Alloy

AZ31C magnesium belongs to the magnesium alloys classification, while K94200 alloy belongs to the iron alloys. There are 22 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AZ31C magnesium and the bottom bar is K94200 alloy.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
140
Elongation at Break, % 12
5.0 to 32
Poisson's Ratio 0.29
0.34
Shear Modulus, GPa 17
54
Shear Strength, MPa 130
330 to 410
Tensile Strength: Ultimate (UTS), MPa 260
500 to 710
Tensile Strength: Yield (Proof), MPa 200
270 to 650

Thermal Properties

Melting Onset (Solidus), °C 550
1440
Specific Heat Capacity, J/kg-K 990
500
Thermal Conductivity, W/m-K 130
15
Thermal Expansion, µm/m-K 26
5.0

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 19
2.7
Electrical Conductivity: Equal Weight (Specific), % IACS 98
3.0

Otherwise Unclassified Properties

Density, g/cm3 1.7
8.2

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 28
35 to 130
Resilience: Unit (Modulus of Resilience), kJ/m3 440
250 to 1460
Stiffness to Weight: Axial, points 15
9.8
Stiffness to Weight: Bending, points 70
21
Strength to Weight: Axial, points 42
17 to 24
Strength to Weight: Bending, points 53
17 to 22
Thermal Diffusivity, mm2/s 74
3.7
Thermal Shock Resistance, points 16
49 to 70