AZ63A Magnesium vs. C55281 Copper
AZ63A magnesium belongs to the magnesium alloys classification, while C55281 copper belongs to the copper alloys. There are 18 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is AZ63A magnesium and the bottom bar is C55281 copper.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 46 | |
110 |
Poisson's Ratio | 0.29 | |
0.34 |
Shear Modulus, GPa | 18 | |
40 |
Tensile Strength: Ultimate (UTS), MPa | 190 to 270 | |
190 |
Thermal Properties
Latent Heat of Fusion, J/g | 350 | |
190 |
Maximum Temperature: Mechanical, °C | 120 | |
200 |
Melting Completion (Liquidus), °C | 610 | |
810 |
Melting Onset (Solidus), °C | 450 | |
640 |
Specific Heat Capacity, J/kg-K | 980 | |
400 |
Thermal Expansion, µm/m-K | 26 | |
16 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.8 | |
8.7 |
Embodied Carbon, kg CO2/kg material | 22 | |
7.0 |
Embodied Energy, MJ/kg | 150 | |
110 |
Common Calculations
Stiffness to Weight: Axial, points | 14 | |
6.9 |
Stiffness to Weight: Bending, points | 66 | |
18 |
Strength to Weight: Axial, points | 29 to 41 | |
6.1 |
Strength to Weight: Bending, points | 40 to 51 | |
8.5 |
Thermal Shock Resistance, points | 11 to 16 | |
7.7 |
Alloy Composition
Aluminum (Al), % | 5.3 to 6.7 | |
0 |
Copper (Cu), % | 0 to 0.25 | |
88.5 to 89.4 |
Magnesium (Mg), % | 88.6 to 92.1 | |
0 |
Manganese (Mn), % | 0.15 to 0.35 | |
0 |
Nickel (Ni), % | 0 to 0.010 | |
0 |
Phosphorus (P), % | 0 | |
5.8 to 6.2 |
Silicon (Si), % | 0 to 0.3 | |
0 |
Silver (Ag), % | 0 | |
4.8 to 5.2 |
Zinc (Zn), % | 2.5 to 3.5 | |
0 |
Residuals, % | 0 | |
0 to 0.15 |