MakeItFrom.com
Menu (ESC)

AZ91A Magnesium vs. S30530 Stainless Steel

AZ91A magnesium belongs to the magnesium alloys classification, while S30530 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AZ91A magnesium and the bottom bar is S30530 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 63
180
Elastic (Young's, Tensile) Modulus, GPa 46
200
Elongation at Break, % 5.0
46
Fatigue Strength, MPa 99
210
Poisson's Ratio 0.29
0.28
Shear Modulus, GPa 18
77
Shear Strength, MPa 140
410
Tensile Strength: Ultimate (UTS), MPa 240
590
Tensile Strength: Yield (Proof), MPa 160
230

Thermal Properties

Latent Heat of Fusion, J/g 360
310
Maximum Temperature: Mechanical, °C 130
970
Melting Completion (Liquidus), °C 600
1410
Melting Onset (Solidus), °C 470
1370
Specific Heat Capacity, J/kg-K 990
480
Thermal Conductivity, W/m-K 73
15
Thermal Expansion, µm/m-K 26
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 10
2.1
Electrical Conductivity: Equal Weight (Specific), % IACS 52
2.4

Otherwise Unclassified Properties

Base Metal Price, % relative 12
18
Density, g/cm3 1.7
7.8
Embodied Carbon, kg CO2/kg material 22
3.4
Embodied Energy, MJ/kg 160
48
Embodied Water, L/kg 990
150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 11
210
Resilience: Unit (Modulus of Resilience), kJ/m3 280
130
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 69
25
Strength to Weight: Axial, points 38
21
Strength to Weight: Bending, points 49
20
Thermal Diffusivity, mm2/s 42
4.1
Thermal Shock Resistance, points 14
13

Alloy Composition

Aluminum (Al), % 8.3 to 9.7
0
Carbon (C), % 0
0 to 0.080
Chromium (Cr), % 0
17 to 20.5
Copper (Cu), % 0 to 0.1
0.75 to 3.5
Iron (Fe), % 0
58.4 to 72.5
Magnesium (Mg), % 88.2 to 91.2
0
Manganese (Mn), % 0.13 to 0.5
0 to 2.0
Molybdenum (Mo), % 0
0.75 to 1.5
Nickel (Ni), % 0 to 0.030
8.5 to 11.5
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.5
0.5 to 2.5
Sulfur (S), % 0
0 to 0.030
Zinc (Zn), % 0.35 to 1.0
0