MakeItFrom.com
Menu (ESC)

AZ91B Magnesium vs. EN 1.1181 Steel

AZ91B magnesium belongs to the magnesium alloys classification, while EN 1.1181 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AZ91B magnesium and the bottom bar is EN 1.1181 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 63
160 to 180
Elastic (Young's, Tensile) Modulus, GPa 46
190
Elongation at Break, % 5.0
19 to 20
Fatigue Strength, MPa 79
190 to 260
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 18
73
Shear Strength, MPa 140
350 to 390
Tensile Strength: Ultimate (UTS), MPa 240
560 to 620
Tensile Strength: Yield (Proof), MPa 160
280 to 380

Thermal Properties

Latent Heat of Fusion, J/g 360
250
Maximum Temperature: Mechanical, °C 130
400
Melting Completion (Liquidus), °C 600
1460
Melting Onset (Solidus), °C 470
1420
Specific Heat Capacity, J/kg-K 990
470
Thermal Conductivity, W/m-K 73
42
Thermal Expansion, µm/m-K 26
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 11
7.2
Electrical Conductivity: Equal Weight (Specific), % IACS 58
8.3

Otherwise Unclassified Properties

Base Metal Price, % relative 12
2.1
Density, g/cm3 1.7
7.8
Embodied Carbon, kg CO2/kg material 22
1.4
Embodied Energy, MJ/kg 160
19
Embodied Water, L/kg 990
47

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 11
90 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 280
210 to 380
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 69
24
Strength to Weight: Axial, points 38
20 to 22
Strength to Weight: Bending, points 49
19 to 21
Thermal Diffusivity, mm2/s 42
11
Thermal Shock Resistance, points 14
19 to 21

Alloy Composition

Aluminum (Al), % 8.3 to 9.7
0
Carbon (C), % 0
0.32 to 0.39
Chromium (Cr), % 0
0 to 0.4
Copper (Cu), % 0 to 0.35
0
Iron (Fe), % 0
97.4 to 99.18
Magnesium (Mg), % 87.9 to 91.2
0
Manganese (Mn), % 0.13 to 0.5
0.5 to 0.8
Molybdenum (Mo), % 0
0 to 0.1
Nickel (Ni), % 0 to 0.030
0 to 0.4
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.5
0 to 0.4
Sulfur (S), % 0
0 to 0.035
Zinc (Zn), % 0.35 to 1.0
0