MakeItFrom.com
Menu (ESC)

AZ91D Magnesium vs. Nickel 718

AZ91D magnesium belongs to the magnesium alloys classification, while nickel 718 belongs to the nickel alloys. There are 30 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AZ91D magnesium and the bottom bar is nickel 718.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 46
190
Elongation at Break, % 2.3 to 4.5
12 to 50
Fatigue Strength, MPa 74 to 85
460 to 760
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 18
75
Shear Strength, MPa 120 to 140
660 to 950
Tensile Strength: Ultimate (UTS), MPa 160 to 220
930 to 1530
Tensile Strength: Yield (Proof), MPa 80 to 130
510 to 1330

Thermal Properties

Latent Heat of Fusion, J/g 350
310
Maximum Temperature: Mechanical, °C 130
980
Melting Completion (Liquidus), °C 600
1340
Melting Onset (Solidus), °C 490
1260
Specific Heat Capacity, J/kg-K 990
450
Thermal Conductivity, W/m-K 78
11
Thermal Expansion, µm/m-K 27
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 11
1.4
Electrical Conductivity: Equal Weight (Specific), % IACS 58
1.5

Otherwise Unclassified Properties

Base Metal Price, % relative 12
75
Density, g/cm3 1.7
8.3
Embodied Carbon, kg CO2/kg material 22
13
Embodied Energy, MJ/kg 160
190
Embodied Water, L/kg 990
250

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.2 to 7.7
140 to 390
Resilience: Unit (Modulus of Resilience), kJ/m3 69 to 170
660 to 4560
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 69
23
Strength to Weight: Axial, points 26 to 34
31 to 51
Strength to Weight: Bending, points 38 to 46
25 to 35
Thermal Diffusivity, mm2/s 45
3.0
Thermal Shock Resistance, points 9.5 to 13
27 to 44

Alloy Composition

Aluminum (Al), % 8.3 to 9.7
0.2 to 0.8
Boron (B), % 0
0 to 0.0060
Carbon (C), % 0
0 to 0.080
Chromium (Cr), % 0
17 to 21
Cobalt (Co), % 0
0 to 1.0
Copper (Cu), % 0 to 0.030
0 to 0.3
Iron (Fe), % 0 to 0.0050
11.1 to 24.6
Magnesium (Mg), % 88.7 to 91.2
0
Manganese (Mn), % 0.15 to 0.5
0 to 0.35
Molybdenum (Mo), % 0
2.8 to 3.3
Nickel (Ni), % 0 to 0.0020
50 to 55
Niobium (Nb), % 0
4.8 to 5.5
Phosphorus (P), % 0
0 to 0.015
Silicon (Si), % 0 to 0.1
0 to 0.35
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0
0.65 to 1.2
Zinc (Zn), % 0.35 to 1.0
0

Comparable Variants