MakeItFrom.com
Menu (ESC)

C355.0 Aluminum vs. C33200 Brass

C355.0 aluminum belongs to the aluminum alloys classification, while C33200 brass belongs to the copper alloys. There are 28 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C355.0 aluminum and the bottom bar is C33200 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
100
Elongation at Break, % 2.7 to 3.8
7.0 to 60
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
40
Tensile Strength: Ultimate (UTS), MPa 290 to 310
320 to 520
Tensile Strength: Yield (Proof), MPa 200 to 230
110 to 450

Thermal Properties

Latent Heat of Fusion, J/g 470
170
Maximum Temperature: Mechanical, °C 170
130
Melting Completion (Liquidus), °C 620
930
Melting Onset (Solidus), °C 570
900
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 150
120
Thermal Expansion, µm/m-K 22
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 39
26
Electrical Conductivity: Equal Weight (Specific), % IACS 130
28

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
24
Density, g/cm3 2.7
8.2
Embodied Carbon, kg CO2/kg material 8.0
2.6
Embodied Energy, MJ/kg 150
44
Embodied Water, L/kg 1120
320

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 7.5 to 9.8
35 to 150
Resilience: Unit (Modulus of Resilience), kJ/m3 290 to 380
60 to 960
Stiffness to Weight: Axial, points 14
7.1
Stiffness to Weight: Bending, points 51
19
Strength to Weight: Axial, points 30 to 32
11 to 17
Strength to Weight: Bending, points 36 to 37
13 to 17
Thermal Diffusivity, mm2/s 60
37
Thermal Shock Resistance, points 13 to 14
11 to 17

Alloy Composition

Aluminum (Al), % 91.7 to 94.1
0
Copper (Cu), % 1.0 to 1.5
65 to 68
Iron (Fe), % 0 to 0.2
0 to 0.070
Lead (Pb), % 0
1.5 to 2.5
Magnesium (Mg), % 0.4 to 0.6
0
Manganese (Mn), % 0 to 0.1
0
Silicon (Si), % 4.5 to 5.5
0
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.1
29 to 33.5
Residuals, % 0
0 to 0.4