MakeItFrom.com
Menu (ESC)

EN 1.1060 Steel vs. EN AC-46600 Aluminum

EN 1.1060 steel belongs to the iron alloys classification, while EN AC-46600 aluminum belongs to the aluminum alloys. There are 25 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.1060 steel and the bottom bar is EN AC-46600 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 140 to 170
77
Elastic (Young's, Tensile) Modulus, GPa 190
72
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 72
27
Tensile Strength: Ultimate (UTS), MPa 490 to 1720
180

Thermal Properties

Latent Heat of Fusion, J/g 250
490
Maximum Temperature: Mechanical, °C 400
170
Melting Completion (Liquidus), °C 1460
620
Melting Onset (Solidus), °C 1420
560
Specific Heat Capacity, J/kg-K 470
890
Thermal Conductivity, W/m-K 51
130
Thermal Expansion, µm/m-K 12
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.1
29
Electrical Conductivity: Equal Weight (Specific), % IACS 8.1
94

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
10
Density, g/cm3 7.8
2.8
Embodied Carbon, kg CO2/kg material 1.4
7.8
Embodied Energy, MJ/kg 18
150
Embodied Water, L/kg 46
1080

Common Calculations

Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 17 to 61
18
Strength to Weight: Bending, points 18 to 41
25
Thermal Diffusivity, mm2/s 14
51
Thermal Shock Resistance, points 16 to 55
8.1

Alloy Composition

Aluminum (Al), % 0
85.6 to 92.4
Carbon (C), % 0.32 to 0.39
0
Copper (Cu), % 0 to 0.25
1.5 to 2.5
Iron (Fe), % 98.2 to 99.16
0 to 0.8
Lead (Pb), % 0
0 to 0.25
Magnesium (Mg), % 0
0 to 0.35
Manganese (Mn), % 0.5 to 0.8
0.15 to 0.65
Nickel (Ni), % 0
0 to 0.35
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.3
6.0 to 8.0
Sulfur (S), % 0.020 to 0.035
0
Tin (Sn), % 0
0 to 0.15
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 1.0
Residuals, % 0
0 to 0.15