MakeItFrom.com
Menu (ESC)

EN 1.4309 Stainless Steel vs. 713.0 Aluminum

EN 1.4309 stainless steel belongs to the iron alloys classification, while 713.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4309 stainless steel and the bottom bar is 713.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 140
74 to 75
Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 34
3.9 to 4.3
Fatigue Strength, MPa 170
63 to 120
Poisson's Ratio 0.28
0.32
Shear Modulus, GPa 77
27
Tensile Strength: Ultimate (UTS), MPa 490
240 to 260
Tensile Strength: Yield (Proof), MPa 210
170

Thermal Properties

Latent Heat of Fusion, J/g 290
370
Maximum Temperature: Mechanical, °C 960
180
Melting Completion (Liquidus), °C 1420
630
Melting Onset (Solidus), °C 1380
610
Specific Heat Capacity, J/kg-K 480
860
Thermal Conductivity, W/m-K 15
150
Thermal Expansion, µm/m-K 17
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
35
Electrical Conductivity: Equal Weight (Specific), % IACS 2.6
100

Otherwise Unclassified Properties

Base Metal Price, % relative 16
9.5
Density, g/cm3 7.8
3.1
Embodied Carbon, kg CO2/kg material 3.1
7.8
Embodied Energy, MJ/kg 45
150
Embodied Water, L/kg 150
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
8.7 to 9.9
Resilience: Unit (Modulus of Resilience), kJ/m3 110
210 to 220
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 18
22 to 23
Strength to Weight: Bending, points 18
28 to 29
Thermal Diffusivity, mm2/s 4.1
57
Thermal Shock Resistance, points 11
10 to 11

Alloy Composition

Aluminum (Al), % 0
87.6 to 92.4
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 18 to 20
0 to 0.35
Copper (Cu), % 0
0.4 to 1.0
Iron (Fe), % 64.2 to 73
0 to 1.1
Magnesium (Mg), % 0
0.2 to 0.5
Manganese (Mn), % 0 to 2.0
0 to 0.6
Nickel (Ni), % 9.0 to 12
0 to 0.15
Nitrogen (N), % 0 to 0.2
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.5
0 to 0.25
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
7.0 to 8.0
Residuals, % 0
0 to 0.25