MakeItFrom.com
Menu (ESC)

EN 1.4347 Stainless Steel vs. 1435 Aluminum

EN 1.4347 stainless steel belongs to the iron alloys classification, while 1435 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4347 stainless steel and the bottom bar is 1435 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 23
4.1 to 32
Fatigue Strength, MPa 320
27 to 49
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 79
26
Tensile Strength: Ultimate (UTS), MPa 660
81 to 150
Tensile Strength: Yield (Proof), MPa 480
23 to 130

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1100
170
Melting Completion (Liquidus), °C 1410
650
Melting Onset (Solidus), °C 1370
640
Specific Heat Capacity, J/kg-K 490
900
Thermal Conductivity, W/m-K 15
230
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.1
60
Electrical Conductivity: Equal Weight (Specific), % IACS 2.4
200

Otherwise Unclassified Properties

Base Metal Price, % relative 16
9.0
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 3.1
8.2
Embodied Energy, MJ/kg 44
150
Embodied Water, L/kg 170
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
5.0 to 20
Resilience: Unit (Modulus of Resilience), kJ/m3 570
3.8 to 110
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 24
8.3 to 15
Strength to Weight: Bending, points 22
15 to 23
Thermal Diffusivity, mm2/s 4.0
93
Thermal Shock Resistance, points 19
3.6 to 6.7

Alloy Composition

Aluminum (Al), % 0
99.35 to 99.7
Carbon (C), % 0 to 0.050
0
Chromium (Cr), % 25 to 27
0
Copper (Cu), % 0
0 to 0.020
Iron (Fe), % 62.2 to 69.4
0.3 to 0.5
Magnesium (Mg), % 0
0 to 0.050
Manganese (Mn), % 0 to 1.5
0 to 0.050
Nickel (Ni), % 5.5 to 7.5
0
Nitrogen (N), % 0.1 to 0.2
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.5
0 to 0.15
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.030
Zinc (Zn), % 0
0 to 0.1