MakeItFrom.com
Menu (ESC)

EN 1.4460 Stainless Steel vs. 1070A Aluminum

EN 1.4460 stainless steel belongs to the iron alloys classification, while 1070A aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4460 stainless steel and the bottom bar is 1070A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 220
18 to 40
Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 21
2.3 to 33
Fatigue Strength, MPa 330
17 to 51
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 80
26
Shear Strength, MPa 470
44 to 81
Tensile Strength: Ultimate (UTS), MPa 750
68 to 140
Tensile Strength: Yield (Proof), MPa 510
17 to 120

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1100
170
Melting Completion (Liquidus), °C 1430
640
Melting Onset (Solidus), °C 1390
640
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
230
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
60
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
200

Otherwise Unclassified Properties

Base Metal Price, % relative 18
9.0
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 3.4
8.2
Embodied Energy, MJ/kg 48
150
Embodied Water, L/kg 180
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
3.0 to 18
Resilience: Unit (Modulus of Resilience), kJ/m3 640
2.1 to 100
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 27
7.0 to 14
Strength to Weight: Bending, points 24
14 to 22
Thermal Diffusivity, mm2/s 4.0
94
Thermal Shock Resistance, points 20
3.1 to 6.3

Alloy Composition

Aluminum (Al), % 0
99.7 to 100
Carbon (C), % 0 to 0.050
0
Chromium (Cr), % 25 to 28
0
Copper (Cu), % 0
0 to 0.030
Iron (Fe), % 60.2 to 69.2
0 to 0.25
Magnesium (Mg), % 0
0 to 0.030
Manganese (Mn), % 0 to 2.0
0 to 0.030
Molybdenum (Mo), % 1.3 to 2.0
0
Nickel (Ni), % 4.5 to 6.5
0
Nitrogen (N), % 0.050 to 0.2
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.0
0 to 0.2
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.030
Zinc (Zn), % 0
0 to 0.070