MakeItFrom.com
Menu (ESC)

EN 1.4462 Stainless Steel vs. 308.0 Aluminum

EN 1.4462 stainless steel belongs to the iron alloys classification, while 308.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4462 stainless steel and the bottom bar is 308.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 240
70
Elastic (Young's, Tensile) Modulus, GPa 200
73
Elongation at Break, % 26
2.0
Fatigue Strength, MPa 370
89
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 80
27
Shear Strength, MPa 500
150
Tensile Strength: Ultimate (UTS), MPa 780
190
Tensile Strength: Yield (Proof), MPa 520
110

Thermal Properties

Latent Heat of Fusion, J/g 300
470
Maximum Temperature: Mechanical, °C 1060
170
Melting Completion (Liquidus), °C 1450
620
Melting Onset (Solidus), °C 1400
540
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 15
140
Thermal Expansion, µm/m-K 13
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
37
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
110

Otherwise Unclassified Properties

Base Metal Price, % relative 17
10
Density, g/cm3 7.8
2.9
Embodied Carbon, kg CO2/kg material 3.6
7.7
Embodied Energy, MJ/kg 49
140
Embodied Water, L/kg 160
1080

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
3.3
Resilience: Unit (Modulus of Resilience), kJ/m3 670
83
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 28
18
Strength to Weight: Bending, points 24
25
Thermal Diffusivity, mm2/s 4.0
55
Thermal Shock Resistance, points 21
9.2

Alloy Composition

Aluminum (Al), % 0
85.7 to 91
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 21 to 23
0
Copper (Cu), % 0
4.0 to 5.0
Iron (Fe), % 63.7 to 71.9
0 to 1.0
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 0 to 2.0
0 to 0.5
Molybdenum (Mo), % 2.5 to 3.5
0
Nickel (Ni), % 4.5 to 6.5
0
Nitrogen (N), % 0.1 to 0.22
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.0
5.0 to 6.0
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 1.0
Residuals, % 0
0 to 0.5