MakeItFrom.com
Menu (ESC)

EN 1.4462 Stainless Steel vs. 6106 Aluminum

EN 1.4462 stainless steel belongs to the iron alloys classification, while 6106 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4462 stainless steel and the bottom bar is 6106 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 26
9.1
Fatigue Strength, MPa 370
88
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 80
26
Shear Strength, MPa 500
170
Tensile Strength: Ultimate (UTS), MPa 780
290
Tensile Strength: Yield (Proof), MPa 520
220

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1060
160
Melting Completion (Liquidus), °C 1450
660
Melting Onset (Solidus), °C 1400
610
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
190
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
49
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
160

Otherwise Unclassified Properties

Base Metal Price, % relative 17
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.6
8.3
Embodied Energy, MJ/kg 49
150
Embodied Water, L/kg 160
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
24
Resilience: Unit (Modulus of Resilience), kJ/m3 670
370
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 28
29
Strength to Weight: Bending, points 24
35
Thermal Diffusivity, mm2/s 4.0
78
Thermal Shock Resistance, points 21
13

Alloy Composition

Aluminum (Al), % 0
97.2 to 99.3
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 21 to 23
0 to 0.2
Copper (Cu), % 0
0 to 0.25
Iron (Fe), % 63.7 to 71.9
0 to 0.35
Magnesium (Mg), % 0
0.4 to 0.8
Manganese (Mn), % 0 to 2.0
0.050 to 0.2
Molybdenum (Mo), % 2.5 to 3.5
0
Nickel (Ni), % 4.5 to 6.5
0
Nitrogen (N), % 0.1 to 0.22
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.0
0.3 to 0.6
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.15
Residuals, % 0
0 to 0.15