MakeItFrom.com
Menu (ESC)

EN 1.4462 Stainless Steel vs. 852.0 Aluminum

EN 1.4462 stainless steel belongs to the iron alloys classification, while 852.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4462 stainless steel and the bottom bar is 852.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 240
64
Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 26
3.4
Fatigue Strength, MPa 370
73
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 80
26
Shear Strength, MPa 500
130
Tensile Strength: Ultimate (UTS), MPa 780
200
Tensile Strength: Yield (Proof), MPa 520
150

Thermal Properties

Latent Heat of Fusion, J/g 300
370
Maximum Temperature: Mechanical, °C 1060
190
Melting Completion (Liquidus), °C 1450
640
Melting Onset (Solidus), °C 1400
210
Specific Heat Capacity, J/kg-K 480
840
Thermal Conductivity, W/m-K 15
180
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
45
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
130

Otherwise Unclassified Properties

Base Metal Price, % relative 17
15
Density, g/cm3 7.8
3.2
Embodied Carbon, kg CO2/kg material 3.6
8.5
Embodied Energy, MJ/kg 49
160
Embodied Water, L/kg 160
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
6.2
Resilience: Unit (Modulus of Resilience), kJ/m3 670
160
Stiffness to Weight: Axial, points 14
12
Stiffness to Weight: Bending, points 25
43
Strength to Weight: Axial, points 28
17
Strength to Weight: Bending, points 24
24
Thermal Diffusivity, mm2/s 4.0
65
Thermal Shock Resistance, points 21
8.7

Alloy Composition

Aluminum (Al), % 0
86.6 to 91.3
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 21 to 23
0
Copper (Cu), % 0
1.7 to 2.3
Iron (Fe), % 63.7 to 71.9
0 to 0.7
Magnesium (Mg), % 0
0.6 to 0.9
Manganese (Mn), % 0 to 2.0
0 to 0.1
Molybdenum (Mo), % 2.5 to 3.5
0
Nickel (Ni), % 4.5 to 6.5
0.9 to 1.5
Nitrogen (N), % 0.1 to 0.22
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.0
0 to 0.4
Sulfur (S), % 0 to 0.015
0
Tin (Sn), % 0
5.5 to 7.0
Titanium (Ti), % 0
0 to 0.2
Residuals, % 0
0 to 0.3