MakeItFrom.com
Menu (ESC)

EN 1.4477 Stainless Steel vs. EN AC-48000 Aluminum

EN 1.4477 stainless steel belongs to the iron alloys classification, while EN AC-48000 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4477 stainless steel and the bottom bar is EN AC-48000 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 270
100 to 110
Elastic (Young's, Tensile) Modulus, GPa 210
73
Elongation at Break, % 22 to 23
1.0
Fatigue Strength, MPa 420 to 490
85 to 86
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 81
28
Tensile Strength: Ultimate (UTS), MPa 880 to 930
220 to 310
Tensile Strength: Yield (Proof), MPa 620 to 730
210 to 270

Thermal Properties

Latent Heat of Fusion, J/g 300
570
Maximum Temperature: Mechanical, °C 1100
190
Melting Completion (Liquidus), °C 1430
600
Melting Onset (Solidus), °C 1380
560
Specific Heat Capacity, J/kg-K 480
890
Thermal Conductivity, W/m-K 13
130
Thermal Expansion, µm/m-K 13
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
33
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
110

Otherwise Unclassified Properties

Base Metal Price, % relative 20
10
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 3.7
7.9
Embodied Energy, MJ/kg 52
140
Embodied Water, L/kg 190
1030

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180 to 190
2.2 to 3.0
Resilience: Unit (Modulus of Resilience), kJ/m3 940 to 1290
300 to 510
Stiffness to Weight: Axial, points 15
15
Stiffness to Weight: Bending, points 25
53
Strength to Weight: Axial, points 31 to 33
23 to 33
Strength to Weight: Bending, points 26 to 27
31 to 39
Thermal Diffusivity, mm2/s 3.5
54
Thermal Shock Resistance, points 23 to 25
10 to 15

Alloy Composition

Aluminum (Al), % 0
80.4 to 87.2
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 28 to 30
0
Copper (Cu), % 0 to 0.8
0.8 to 1.5
Iron (Fe), % 56.6 to 63.6
0 to 0.7
Magnesium (Mg), % 0
0.8 to 1.5
Manganese (Mn), % 0.8 to 1.5
0 to 0.35
Molybdenum (Mo), % 1.5 to 2.6
0
Nickel (Ni), % 5.8 to 7.5
0.7 to 1.3
Nitrogen (N), % 0.3 to 0.4
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 0.5
10.5 to 13.5
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15