MakeItFrom.com
Menu (ESC)

EN 1.4597 Stainless Steel vs. 1060 Aluminum

EN 1.4597 stainless steel belongs to the iron alloys classification, while 1060 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4597 stainless steel and the bottom bar is 1060 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 45
1.1 to 30
Fatigue Strength, MPa 300
15 to 50
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Shear Strength, MPa 470
42 to 75
Tensile Strength: Ultimate (UTS), MPa 680
67 to 130
Tensile Strength: Yield (Proof), MPa 330
17 to 110

Thermal Properties

Latent Heat of Fusion, J/g 290
400
Maximum Temperature: Mechanical, °C 860
170
Melting Completion (Liquidus), °C 1400
660
Melting Onset (Solidus), °C 1350
650
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
230
Thermal Expansion, µm/m-K 17
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
62
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
210

Otherwise Unclassified Properties

Base Metal Price, % relative 11
9.5
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.5
8.3
Embodied Energy, MJ/kg 36
160
Embodied Water, L/kg 140
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 250
0.57 to 37
Resilience: Unit (Modulus of Resilience), kJ/m3 280
2.1 to 89
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 25
6.9 to 13
Strength to Weight: Bending, points 22
14 to 21
Thermal Diffusivity, mm2/s 4.1
96
Thermal Shock Resistance, points 15
3.0 to 5.6

Alloy Composition

Aluminum (Al), % 0
99.6 to 100
Carbon (C), % 0 to 0.1
0
Chromium (Cr), % 15 to 18
0
Copper (Cu), % 2.0 to 3.5
0 to 0.050
Iron (Fe), % 63 to 76.4
0 to 0.35
Magnesium (Mg), % 0
0 to 0.030
Manganese (Mn), % 6.5 to 9.0
0 to 0.030
Molybdenum (Mo), % 0 to 1.0
0
Nickel (Ni), % 0 to 3.0
0
Nitrogen (N), % 0.1 to 0.3
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 2.0
0 to 0.25
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.030
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.050