MakeItFrom.com
Menu (ESC)

EN 1.4615 Stainless Steel vs. 390.0 Aluminum

EN 1.4615 stainless steel belongs to the iron alloys classification, while 390.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4615 stainless steel and the bottom bar is 390.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 150
120
Elastic (Young's, Tensile) Modulus, GPa 190
75
Elongation at Break, % 50
1.0
Fatigue Strength, MPa 190
76 to 110
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
28
Tensile Strength: Ultimate (UTS), MPa 500
280 to 300
Tensile Strength: Yield (Proof), MPa 200
240 to 270

Thermal Properties

Latent Heat of Fusion, J/g 280
640
Maximum Temperature: Mechanical, °C 840
170
Melting Completion (Liquidus), °C 1400
650
Melting Onset (Solidus), °C 1360
560
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 15
130
Thermal Expansion, µm/m-K 17
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
24 to 25
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
79 to 83

Otherwise Unclassified Properties

Base Metal Price, % relative 13
11
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 2.8
7.3
Embodied Energy, MJ/kg 40
130
Embodied Water, L/kg 140
950

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 200
2.7 to 2.9
Resilience: Unit (Modulus of Resilience), kJ/m3 99
380 to 470
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
52
Strength to Weight: Axial, points 18
28 to 30
Strength to Weight: Bending, points 18
35 to 36
Thermal Diffusivity, mm2/s 4.1
56
Thermal Shock Resistance, points 11
14 to 15

Alloy Composition

Aluminum (Al), % 0
74.5 to 79.6
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 14 to 16
0
Copper (Cu), % 2.0 to 4.0
4.0 to 5.0
Iron (Fe), % 63.1 to 72.5
0 to 1.3
Magnesium (Mg), % 0
0.45 to 0.65
Manganese (Mn), % 7.0 to 9.0
0 to 0.1
Molybdenum (Mo), % 0 to 0.8
0
Nickel (Ni), % 4.5 to 6.0
0
Nitrogen (N), % 0.020 to 0.060
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
16 to 18
Sulfur (S), % 0 to 0.010
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.2