MakeItFrom.com
Menu (ESC)

EN 1.4618 Stainless Steel vs. 2036 Aluminum

EN 1.4618 stainless steel belongs to the iron alloys classification, while 2036 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4618 stainless steel and the bottom bar is 2036 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 51
24
Fatigue Strength, MPa 240 to 250
130
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 480 to 500
210
Tensile Strength: Ultimate (UTS), MPa 680 to 700
340
Tensile Strength: Yield (Proof), MPa 250 to 260
200

Thermal Properties

Latent Heat of Fusion, J/g 280
390
Maximum Temperature: Mechanical, °C 900
190
Melting Completion (Liquidus), °C 1400
650
Melting Onset (Solidus), °C 1360
560
Specific Heat Capacity, J/kg-K 480
890
Thermal Conductivity, W/m-K 15
160
Thermal Expansion, µm/m-K 16
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
41
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
130

Otherwise Unclassified Properties

Base Metal Price, % relative 13
10
Density, g/cm3 7.7
2.9
Embodied Carbon, kg CO2/kg material 2.7
8.1
Embodied Energy, MJ/kg 39
150
Embodied Water, L/kg 150
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 270 to 280
70
Resilience: Unit (Modulus of Resilience), kJ/m3 160 to 170
270
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
48
Strength to Weight: Axial, points 24 to 25
33
Strength to Weight: Bending, points 22 to 23
38
Thermal Diffusivity, mm2/s 4.0
62
Thermal Shock Resistance, points 15 to 16
15

Alloy Composition

Aluminum (Al), % 0
94.4 to 97.4
Carbon (C), % 0 to 0.1
0
Chromium (Cr), % 16.5 to 18.5
0 to 0.1
Copper (Cu), % 1.0 to 2.5
2.2 to 3.0
Iron (Fe), % 62.7 to 72.5
0 to 0.5
Magnesium (Mg), % 0
0.3 to 0.6
Manganese (Mn), % 5.5 to 9.5
0.1 to 0.4
Nickel (Ni), % 4.5 to 5.5
0
Nitrogen (N), % 0 to 0.15
0
Phosphorus (P), % 0 to 0.070
0
Silicon (Si), % 0 to 1.0
0 to 0.5
Sulfur (S), % 0 to 0.010
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15