MakeItFrom.com
Menu (ESC)

EN 1.4646 Stainless Steel vs. 336.0 Aluminum

EN 1.4646 stainless steel belongs to the iron alloys classification, while 336.0 aluminum belongs to the aluminum alloys. There are 27 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4646 stainless steel and the bottom bar is 336.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 220
110 to 130
Elastic (Young's, Tensile) Modulus, GPa 200
75
Elongation at Break, % 34
0.5
Fatigue Strength, MPa 340
80 to 93
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
28
Shear Strength, MPa 500
190 to 250
Tensile Strength: Ultimate (UTS), MPa 750
250 to 320
Tensile Strength: Yield (Proof), MPa 430
190 to 300

Thermal Properties

Latent Heat of Fusion, J/g 290
570
Maximum Temperature: Mechanical, °C 910
210
Melting Completion (Liquidus), °C 1390
570
Melting Onset (Solidus), °C 1340
540
Specific Heat Capacity, J/kg-K 480
890
Thermal Expansion, µm/m-K 17
19

Otherwise Unclassified Properties

Base Metal Price, % relative 13
11
Density, g/cm3 7.7
2.8
Embodied Carbon, kg CO2/kg material 2.8
7.9
Embodied Energy, MJ/kg 41
140
Embodied Water, L/kg 160
1010

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 220
1.1 to 1.6
Resilience: Unit (Modulus of Resilience), kJ/m3 460
250 to 580
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 27
25 to 32
Strength to Weight: Bending, points 24
32 to 38
Thermal Shock Resistance, points 16
12 to 16

Alloy Composition

Aluminum (Al), % 0
79.1 to 85.8
Carbon (C), % 0.020 to 0.1
0
Chromium (Cr), % 17 to 19
0
Copper (Cu), % 1.5 to 3.0
0.5 to 1.5
Iron (Fe), % 59 to 67.3
0 to 1.2
Magnesium (Mg), % 0
0.7 to 1.3
Manganese (Mn), % 10.5 to 12.5
0 to 0.35
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 3.5 to 4.5
2.0 to 3.0
Nitrogen (N), % 0.2 to 0.3
0
Phosphorus (P), % 0 to 0.050
0
Silicon (Si), % 0 to 1.0
11 to 13
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35