MakeItFrom.com
Menu (ESC)

EN 1.4872 Stainless Steel vs. R30605 Cobalt

EN 1.4872 stainless steel belongs to the iron alloys classification, while R30605 cobalt belongs to the cobalt alloys. They have a modest 30% of their average alloy composition in common, which, by itself, doesn't mean much. There are 25 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown.

For each property being compared, the top bar is EN 1.4872 stainless steel and the bottom bar is R30605 cobalt.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
210
Elongation at Break, % 28
34
Fatigue Strength, MPa 410
260 to 590
Poisson's Ratio 0.28
0.29
Shear Modulus, GPa 79
81
Tensile Strength: Ultimate (UTS), MPa 950
1130 to 1900
Tensile Strength: Yield (Proof), MPa 560
470 to 1600

Thermal Properties

Latent Heat of Fusion, J/g 300
290
Melting Completion (Liquidus), °C 1390
1410
Melting Onset (Solidus), °C 1340
1330
Specific Heat Capacity, J/kg-K 490
410
Thermal Conductivity, W/m-K 15
9.6
Thermal Expansion, µm/m-K 16
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.3
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
1.8

Otherwise Unclassified Properties

Density, g/cm3 7.6
9.6
Embodied Carbon, kg CO2/kg material 3.3
9.8
Embodied Energy, MJ/kg 47
140
Embodied Water, L/kg 180
450

Common Calculations

Stiffness to Weight: Axial, points 15
12
Stiffness to Weight: Bending, points 26
21
Strength to Weight: Axial, points 35
33 to 55
Strength to Weight: Bending, points 28
25 to 36
Thermal Diffusivity, mm2/s 3.9
2.5
Thermal Shock Resistance, points 21
31 to 52

Alloy Composition

Carbon (C), % 0.2 to 0.3
0.050 to 0.15
Chromium (Cr), % 24 to 26
19 to 21
Cobalt (Co), % 0
46.4 to 57
Iron (Fe), % 54.2 to 61.6
0 to 3.0
Manganese (Mn), % 8.0 to 10
1.0 to 2.0
Nickel (Ni), % 6.0 to 8.0
9.0 to 11
Nitrogen (N), % 0.2 to 0.4
0
Phosphorus (P), % 0 to 0.045
0 to 0.040
Silicon (Si), % 0 to 1.0
0 to 0.4
Sulfur (S), % 0 to 0.015
0 to 0.030
Tungsten (W), % 0
14 to 16