MakeItFrom.com
Menu (ESC)

EN 1.4951 Stainless Steel vs. R30605 Cobalt

EN 1.4951 stainless steel belongs to the iron alloys classification, while R30605 cobalt belongs to the cobalt alloys. They have a modest 33% of their average alloy composition in common, which, by itself, doesn't mean much. There are 25 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown.

For each property being compared, the top bar is EN 1.4951 stainless steel and the bottom bar is R30605 cobalt.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
210
Elongation at Break, % 38
34
Fatigue Strength, MPa 190
260 to 590
Poisson's Ratio 0.27
0.29
Shear Modulus, GPa 79
81
Tensile Strength: Ultimate (UTS), MPa 630
1130 to 1900
Tensile Strength: Yield (Proof), MPa 220
470 to 1600

Thermal Properties

Latent Heat of Fusion, J/g 300
290
Melting Completion (Liquidus), °C 1410
1410
Melting Onset (Solidus), °C 1360
1330
Specific Heat Capacity, J/kg-K 480
410
Thermal Conductivity, W/m-K 15
9.6
Thermal Expansion, µm/m-K 16
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.1
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 2.4
1.8

Otherwise Unclassified Properties

Density, g/cm3 7.9
9.6
Embodied Carbon, kg CO2/kg material 4.3
9.8
Embodied Energy, MJ/kg 61
140
Embodied Water, L/kg 190
450

Common Calculations

Stiffness to Weight: Axial, points 14
12
Stiffness to Weight: Bending, points 25
21
Strength to Weight: Axial, points 22
33 to 55
Strength to Weight: Bending, points 21
25 to 36
Thermal Diffusivity, mm2/s 3.9
2.5
Thermal Shock Resistance, points 14
31 to 52

Alloy Composition

Carbon (C), % 0.040 to 0.080
0.050 to 0.15
Chromium (Cr), % 24 to 26
19 to 21
Cobalt (Co), % 0
46.4 to 57
Iron (Fe), % 49.1 to 57
0 to 3.0
Manganese (Mn), % 0 to 2.0
1.0 to 2.0
Nickel (Ni), % 19 to 22
9.0 to 11
Nitrogen (N), % 0 to 0.1
0
Phosphorus (P), % 0 to 0.035
0 to 0.040
Silicon (Si), % 0 to 0.7
0 to 0.4
Sulfur (S), % 0 to 0.015
0 to 0.030
Tungsten (W), % 0
14 to 16